13 Getting StartedUseful InformationTroubleshootingAppendixFirst-time Operation PreparationA Check and identify the supplied accessories.If you do not find the described accessories, contact your technical support office.B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging(Î page 25).Slide the battery pack in parallel with the arrow direction and attach it so that theleft and right dents (A) on the new battery pack match the projections (B) of thecomputer.In case that the dents does not match the projections of the computer, detach thebattery pack once, then slide it while pushing it lightly to avoid floating.z To removeSlide both the left and right latchesto the unlocked position, and pushout the battery pack in parallel withthe computer.CAUTIONz Make sure the battery latches are securely locked. Otherwise the battery packmay fall when you carry the computer.z Do not touch the terminals of the battery pack and the computer. Doing so canmake the terminals dirty or damaged, and may cause malfunction of the batterypack and the computer.Hold the side of the computer with either of your hands and then hold and lift the(A) part to open the display.CAUTIONz Do not open the display wider than necessary (140° or more), and do not applyexcessive pressure to the LCD. Do not open or close the computer holding theedge of the LCD segment.• AC Adaptor . . . . 1Model No: CF-AA6373A• AC Cord . . . . . . .1 • Battery Pack. . . 1Model No: CF-VZSU61U• Operating Instructions (This book) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1• Product Recovery DVD-ROM Windows ® 7 Professional (32-bit) *1 . . . . . . 1• Product Recovery DVD-ROM Windows ® 7 Professional (64-bit) *1 . . . . . . 1*1 “This disc contains 32-bit software” or similar is printed on the label.1 Insert the battery pack.1A AB2 Open the display.2A