Panasonic Toughbook CF-T8EWATZJM Operating Instructions Manual

Also see for CF-T8 series: Reference manual Reference manual Supplementary guide Reference manual Operating instructions

Contents

15 Getting StartedUseful InformationTroubleshootingAppendixz You can change the user name, password, image and security setting aftersetup of Windows.z Remember your password. If you forget the password, you cannot use the Win-dows. Creating a password reset disk beforehand is recommended.z When you set date/time/time zone and click [Next], the screen may not go to thenext step for a few minutes. Do not touch the keyboard, touch pad or touch-screen, and wait until the screen changes.z When using the included stylus, avoid touching the screen with you hands, etc.This can cause input errors.z If “An unexpected error has occurred ...” (or a similar message) is displayed,click [OK]. This is not a malfunction.z At “Welcome to Tablet PC”, you can learn the basic operations of Windows XPTablet PC Edition.Click [start] - [Control Panel] - [User Accounts] - [Create a new account].Follow the on-screen instructions to create a account.CAUTIONz Remember your password. If you forget the password, you cannot use the Windowsoperation system. Creating a password reset disk beforehand is recommended.z Before performing the calibration, close Tablet PC Input Panel.NOTEz At first, log on to Windows as an administrator, and perform this calibration.A Run [Tablet PC Settings].Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].B Click [Calibrate…].C If [User Account Control] is displayed, and click [Yes].D Using the stylus, touch each of the 16 “+” target marks one by one, and thenclick [Yes].NOTEz Perform the following calibration for each user.A Run [Tablet PC Settings].Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].B Click [Calibrate…].C Using the stylus, touch each of the 4 “+” target marks one by one, and thenclick [Yes].A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch ScreenCalibration Utility].B Touch the 9 “+” target marks sequentially with the stylus, and then pressEnter.C Click [Save & Exit].A Click [start] - [Control Panel] - [Other Control Panel Options] - [Tablet Calibration].B Touch the 9 “+” target marks sequentially with the stylus.C Touch [OK] and restart the computer.D Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet andPen Settings].6 Create a new account.7 Perform the touchscreen calibration.