47Fingerprint ReaderNOTEz In the [High] security mode, you have to enter the Supervisor or User Password even after fingerprint authentication.In the [Simple] security mode, you do not have to enter the Supervisor or User password after fingerprint authentica-tion.BackupThe file described below is necessary for recovering the Fingerprint authentication data. Back up this file periodically in a safelocation such as removable disk to avoid data loss resulting from some accidents. We recommend you to store the file in aremovable disk or network drive because the benefit of Fingerprint authentication security can be reduced if you keep the filein the internal flash memory drive.The backup password described below is necessary for bypassing the Fingerprint authentication. We recommend you set thebackup password using the [User Enrollment] wizard. If you do not define the backup password, you may lose your data incase of authentication hardware failure.z File used by each user• Backup user passport data(Default name: .vtp)You need this file when you replace the embedded fingerprint chip, or the flash memory drive, or when reinstallingWindows.This file contains the fingerprints, encryption keys, and logon authentication data.NOTEz How to Backup:Select [Export] in [Import or Export User Data] to save the user data.• Click (Start) - [All Programs] - [Protector Suite QL] - [Control Center] - [Fingerprints].For further information, refer to the software’s online manual (Î page 43).z Password used by each user• Backup Password for EnrollmentThis backup password can be used in case of hardware failure to bypass the fingerprint authentication.CAUTIONz The passwords other than those explained above are also used for security, so do not lose them. For further informa-tion, refer to the software’s online manual (Î page 43).Useful Information