Panasonic VDR-D150EB Operating Instructions Manual

Also see for VDR-D100EB: Service manual Service manual Service manual

Contents

Panasonic VDR-D150EB Operating Instructions Manual Manual pdf 19 page image

SetupPower supply19LSQT1048SetupPower supplyWhen this unit is purchased, the battery is not charged. Charge the battery before using this unit.1 Connect the AC cable to the AC adaptor and theAC outlet.2 Put the battery on the battery mount by aligningthe mark, and then securely plug it in.≥ The output plug of the AC cable is not completely connected to theAC adaptor socket. As shown in A, there is a gap.∫ Charging lampLights up: ChargingGoes off: Charging completedFlashing: The battery is over discharged (discharged excessively). In a while, the lamp will light upand normal charging will start.When the battery temperature is excessively high or low, the CHARGE lamp flashes andthe charging time will be longer than normal.≥ Battery charging time (l 21)≥ We recommend using Panasonic batteries.≥ If you use other batteries, we cannot guarantee thequality of this product.≥ If the DC cable is connected to the AC adaptor, thenthe battery will not charge. Remove the DC cablefrom the AC adaptor.Charging the batteryALSQT1048(ENG).book 19 ページ２００６年２月６日月曜日午後２時１３分