Panasonic VDR-D210P Service Manual

6.2. Service PositionOptical pickupCAUTION: VISIBLE LASER RADIATION DO NOTSTARE INTO THE BEAM OR VIEW DIRECTLY WITHOPTICAL INSTRUMENTS CLASS 2MLaser light striking the eye may cause your eyesightto be lost: For safety, be sure to remove any powersupply (AC adaptor/charger, battery, etc.) from theDVD video camera/recorder before starting work.Caution6.2.1. Extension Cables for Service PositionUsing the following Extension Cables, place the unit as shown for check and service.Note :1. The LCD open/close Switch is for changing between LCD Display or EVF Display. When turning on EVF Display, close the LCDShaft or place some paper or tape, etc. on LCD open/close Switch so that LCD open/close Switch stays ON.2. To eject the DVD manually, slide the Lock lever on the Disc Cover Lock Unit for a short time or slide the EJECT switch.3. Use a grounded ESD wrist strap while disassembling the Lens portion.4. Connect the F.P.C.s to the connectors, verifying the direction of F.P.C.s.The Main P.C.B. or a chip part will be damaged if the 60 Pin Extension Cable (LSUA0061) is misconnected.5. Use extreme care when plugging in or unplugging connectors.11VDR-D210P / VDR-D220P / VDR-D230P / VDR-D210PC / VDR-D220PC / VDR-D230PC