RecordingManual recording functions79LSQT10191 Select [ ], fill the screen with a white subject.2 Move the joystick up to select [ ].When the [ ] display changes from flashing to on, setting iscomplete.≥ When the [ ] display continues flashing green, the white balancecannot be set because the place is dark etc. In this case, use theautomatic white balance.∫ About the white balance sensor AThe white balance sensor detects the type of light source during recording.Do not cover the white balance sensor during recording, or it may notfunction properly.∫ About the black balance adjustmentThis is one of the 3CCD system functions that automatically adjusts the black when the whitebalance is set in the manual adjustment mode. When the black balance is adjusted, the screen willtemporarily be black. (The black balance cannot be adjusted manually.)1 Black balance adjustment in progress. (Flashes.)2 White balance adjustment in progress. (Flashes.)3 Adjustment completed. (Lights up.)To set the white balance manuallyMNLBACKMNLBACKA1 2 3≥ When the [ ] display flashes white, the manualwhite balance previously adjusted is stored.Whenever recording conditions change, re-set thewhite balance for correct adjustment.≥ When setting both the white balance and the iris/gain, set the white balance first.≥ (VDR-D250 only) When the unit is turned on withthe lens cap fitted, the automatic white balanceadjustment may not function properly. Please turnthe unit on after removing the lens cap.LSQT1019(ENG).book 79 ページ ２００６年２月３日 金曜日 午後４時３７分
