Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Also see for Spanish): Installation and operating insctructions Installation and operating instructions Operating instructions Installation and operating instructions Installation and operating instructions

Contents

Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual Manual pdf 109 page image

109LSQT1011With other productsWith a printer (PictBridge)With a printer (PictBridge)(SD)To print pictures by directly connecting this unit to the printer, use a printer compatible withPictBridge. (Read the operating instructions for the printer.)≥ Use the AC adaptor to free you from worrying about the battery running down.¬ Insert an SD card with recorded images in the unit, turn on the unit and thenrotate the mode dial to select .1 Press the MENU button, then select [ SETUP]# [ USB FUNCTION] # [PictBridge] and pressthe joystick.≥ Press the MENU button to exit the menu screen.2 Connect this unit and a printer.The [ ] indication appears on this unit’sscreen.≥ If the [ ] indication does not appear orcontinues to flash, disconnect and then reconnect theUSB cable or check the printer, SD card and settings onthis unit.≥ Do not use any other USB cables except the suppliedone. (Operation is not guaranteed with any other USBcables.)3 Select a file to be printed, then press the joystick.The number of pictures set is displayed.4 Move the joystick up or down to select the desired number of prints,then press the joystick.≥ You can set up to 9 prints.≥ To cancel the setting, set the number of prints to [0].≥ Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.5 Press the MENU button to display the PictBridgemenus.A USB cable (supplied)≥ Insert the plugs as far as they will go.A