3■ To hear recorded messages while away fromhome (Remote control)Preparation before you leave homeStore a remote control number.With the handset placed on the base unit, press(機能 /決定)(機能 /決定).Enter the desired 4-digit number. Press(機能 /決定), then press .When you leave home, press to turn on theindicator.To hear messagesDial your home phone number. While theoutgoing message is played back, enter yourremote control number. Announcement.Press 4 . You will hear recorded messages ifany.NOTE● This operation can be made only from atouch-tone phone.Cordless handset■ To make a callLift the cordless handset from the charger andpress ( 33 ). Dial the phone number ( 27 ).Talk. To end the call, place the cordlesshandset on the charger or press ( 26 ).■ To receive a callWhen the phone rings, lift the cordless handsetfrom the charger and press . Talk. Toend the call, place the cordless handset on thecharger or press .■ To make a call using the speakerphone(Hands-free talk)Press ( 28 ). Dial the phone number.Talk to the microphone ( 29 ). To end the call,place the cordless handset on the charger orpress .● Speak clearly about 50 cm away from themicrophone.● Speak alternately with the other party. Thesound may cut in and out if you both speak atthe same time.■ To receive a call with the speakerphone(Hands-free talk)When the phone rings, press . Talk tothe microphone. To end the call, place thecordless handset on the charger or press .● The number after the button shows the locationof the button described in the previous page.Base unit■ To make a callLift the handset. Dial the phone number ( 14 ).Talk.■ To receive a callWhen the phone rings, lift the handset. Talk.■ To place the current call on holdPress ( 17 ) during a call. (You can place thehandset on the base unit.)■ To retrieve the held call● If you have returned the handset on the baseunit, lift the handset.● If you have not returned the handset on thebase unit, press .■ To transfer the held call to the cordlesshandsetPress during a call. ( When youuse multiple cordless handsets, press -(Intercom No.).) Place the handset on thebase unit when the other party answers.■ To use TAM (Telephone Answering Machine)When you leave home, press ( 7 ) to turnon the indicator. (To deactivate, pressagain to turn off the indicator.)When receiving a call while TAM is activated,it answers the call automatically in Japanese,and records the incoming messages. Then, theindicator starts flashing.When you return home, press to playback the messages. The indicator turns offand the answering mode is deactivated.After playing back the messages, press ( 15 )twice to erase the messages or press tokeep the messages.To play back all messages while TAM isdeactivated, press ( 8 ) ( 6 ) toselect “ すべて再生 ” (機能 /決定) ( 9 ).After playing back the messages, presstwice to erase the messages or press tokeep the messages.*Up to 50 messages can be recorded for approx.12 minutes in total.Basic Operations