3■ To use TAM (Telephone Answering Machine)When you leave home, press ( 12 )( ). Then, is displayed.(To deactivate, press ( ).)When receiving a call while TAM is activated,it answers the call automatically in Japanese,and records the incoming messages.Then, the message/incoming calllog indicator ( 2 ) starts flashing and“ 新規用件あり [留守] 押す ” is displayed.When you return home, press( ) to play back the messages.The answering mode is deactivated.After playing back the messages, presstwice to erase the messages or press tokeep the messages.To play back the messages while TAM isdeactivated, press ( 7 ) toselect “ すべて再生 ” (機能 /決定)( 14 ).After playing back the messages, presstwice to erase the messages or press tokeep the messages.* Up to 50 messages can be recorded for approx.12 minutes in total.■ To hear recorded messages while away fromhome (Remote control)Preparation before you leave homeStore a remote control number.Press (機能 /決定) .Enter the desired 4-digit number. Press(機能 /決定) , then press .When you leave home, press( ). Then, is displayed.To hear messagesDial your home phone number. While theoutgoing message is played back, enter yourremote control number. Announcement.Press 4 . You will hear recorded messages ifany.NOTE● This operation can be made only from atouch-tone phone.● The number after the button shows the locationof the button described in the previous page.■ To make a callLift the cordless handset from the base unit andpress ( 15 ). Dial the phone number ( 9 ).Talk. To end the call, place the cordlesshandset on the base unit or press ( 8 ).■ To receive a callWhen the phone rings, lift the cordless handsetfrom the base unit and press . Talk.To end the call, place the cordless handset onthe base unit or press .■ To make a call using the speakerphone(Hands-free talk)Lift the cordless handset from the base unit andpress ( 10 ). Dial the phone number.Talk to the microphone ( 11 ). To end the call,place the cordless handset on the base unit orpress .● Speak clearly about 50 cm away from themicrophone.● Speak alternately with the other party. Thesound may cut in and out if you both speak atthe same time.■ To receive a call with the speakerphone(Hands-free talk)When the phone rings, lift the cordless handsetfrom the base unit and press . Talk tothe microphone. To end the call, place thecordless handset on the base unit or press .■ To place the current call on holdPress ( 6 ) during a call.■ To retrieve the held callPress .■ To transfer the held call to another cordlesshandsetPress during a call. Press- (Intercom No.). Press whenthe other party answers.Basic Operations