4Attaching the pedestal to TV Set-upz Fix securely with assembly screws A . (Total 4 screws)z Tighten screws firmly.z Tighten assembly screws B (total 4 screws) loosely atfirst, then tighten them firmly to fix securely.ABracketFrontBaseProtrusion of Neck (Bottom)Rear sideBaseHole for pedestalinstallationBracketDo not disassemble or modify the pedestal.z Otherwise the TV may fall over and become damaged, andpersonal injury may result.Do not use any pedestal other than that provided with this TV.z Otherwise the TV may fall over and become damaged, andpersonal injury may result.Do not use the pedestal if it becomes warped or physicallydamaged.z If you use the pedestal when it is physically damaged,personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.z If sufficient care is not taken to ensure screws are properlytightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and becomedamaged, and personal injury may result.Optional accessoriesWall-hanging bracket (not supplied)Use the screws that are threaded into the stand-mounting insertson the back of your LCD TV to secure it to a Wall Mounting kit.It is safe to use long screws for this product.When using long screws, the two bottom screws may loosen, butthe top two will remain tightly in place to secure the mounted TV.Wall Mounting Inserts VESA standardinterface39” 200 x 200 mm50” 400 x 200 mmMounting screwsmeasurements:M6 x 4Please contact your nearest Panasonic dealer to purchase therecommended wall-hanging bracket. For additional details, pleaserefer to the wall-hanging bracket installation manual.Screw for fixing the TV onto thewall-hanging bracket(not supplied with the TV)(View from the side)M6Depth of screw:39” Minimum: 0.75 ” (19.0 mm)39” Maximum: 0.79 ” (20.0 mm)50” Minimum: 0.71 ” (18.0 mm)50” Maximum: 0.79 ” (20.0 mm)z Always be sure to ask a qualified technician to carry out set up.Incorrect fitting may cause equipment to fall, resulting in injuryand product damage. Any damage resulting from not having aprofessional installer mount your unit will void your warranty.z Do not mount the unit directly below ceiling lights (such asspotlights, floodlights or halogen lights) which typically give offhigh heat. Doing so may warp or damage plastic cabinet parts.z Take care when fixing wall brackets to the wall. Always ensurethat there are no electrical cables or pipes in the wall beforehanging bracket.z When using an angled-type wall hanging bracket, please ensurethat there is sufficient space for the connecting cables so thatthey do not press against the wall when the TV is tilted forward.z For safety reasons, remove units no longer being used fromtheir wall-mounted locations.