Panasonic VIERA TH-32ES500H Operating Instructions Manual

English 11First time AutoTuningWhen the TV is turned on for the first time, it willautomatically search for available TV channels and giveoptions to set up the TV.● These steps are not necessary if the setup has beencompleted by your local dealer.● Please complete connections (p. 7 - 9) and settings(if necessary) of the connected equipment beforestarting Auto Tuning. For information about thesettings for the connected equipment, read themanual of the equipment.1 Plug the TV into a live mains socketand turn the power on● Takes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Example:Please select your viewing environment.Home Shop■ How to use remote controlMove the cursorAccess the item / store the settingReturn to the previous item (if available)Select the languageSelect [Home]Select [Home] viewing environment to use in your homeenvironment.● [Shop] is for shop display.● To change viewing environment later on, you willneed to initialise all settings by accessing ShippingCondition.Set up the network connection■ Installing / Removing batteriesPull openHookNote the correctpolarity (+ or -)CloseIndicator / Control panel● When pressing 4, 5, 6 buttons, the control panelguide appears on the right side of the screen for3 seconds to highlight which button has beenpressed.75461 2 3Rear side of the TV1 Remote control signal receiver● Do not place any objects between the TV remotecontrol signal receiver and remote control.2 Ambient sensor● Senses brightness to adjust picture quality when[Ambient Sensor] in the Picture Menu is set to[On].3 Power LEDRed: StandbyGreen: OnOrange: Standby with some functions (recording,etc.) active● The LED blinks when the TV receives a commandfrom the remote control.4 Input mode selection● Press repeatedly until you reach the desired mode.[Main Menu]● Press and hold for about 3 seconds to display mainmenu.OK (when in the menu system)5 Channel Up / DownCursor Up / Down (when in the menu system)6 Volume Up / DownCursor Left / Right (when in the menu system)7 Mains power On / Off switch● Use to switch the mains power.● To turn Off the apparatus completely, you must pullthe mains plug out of the mains socket.● [ ]: Standby / On