Panasonic VIERA TH-40E400A Operating Instructions Manual

Using the Menu Functions16■ [Radio Mode]Sets the timer to turn off the screen automatically whena radio channel is selected.[Off] / [5 / 10 / 15 / 20 seconds]– The sound is active even when the screen is off.This function could reduce power consumption whenlistening to a radio channel.– Press any button except Standby, Volume Up / Downand Sound Mute buttons to turn on the screen.– Not available in Analogue TV mode.[System Menu]■ [Shipping Condition]Resets all settings, including tuning data, to the originalcondition.– Access this function and follow the on-screeninstructions to complete the procedures.– Initial Setup (p. 8) will automatically start after[Shipping Condition] completes.■ [System Update] (p. 18)■ [Software Licence]Displays the software licence information.■ [System Information]Displays the software version.[Power Save]Reduces brightness of picture to economise on powerconsumption. [Off] / [On]Using the [Tuning Menu]Use the [Tuning Menu] to retune the TV automatically ormanually, add new channels, check signal conditions,create your favourite channel lists, skip unwantedchannels, etc.[Automatic Channel Search][Auto Tuning](TV mode only)Retunes the channels received in your areaautomatically.●Automatically searches and adds available channels tothe memory.●After the scan is complete, all previously savedchannels will be erased.Example:Automatic Channel SearchStatus: Scanning...Analogue : 0Digital : 1EXITRETURNScan 5%●When the operation is completed, the channel at thelowest position will be displayed.●If tuning has not been done completely, perform[Analogue Manual Tuning].[Scan]Adds new channels automatically to the channel list.Example: AntennaScanStatus: Scanning...Analogue : 0Digital : 1Scan 5%[Analogue Manual Tuning]Sets analogue channel manually.Example: AntennaAnalogue Manual TuningSearching ChannelsScan up Scan downStart Frequency (MHz) 48.001 Enter the frequency to start scanning.2 Select the scanning method.OKSelect• [Scan up]: Scans ascendingly from the enteredfrequency to higher frequencies.• [Scan down]: Scans descendingly from the enteredfrequency to lower frequencies.[DVB-T Signal Condition]Shows the Digital TV signal condition.Example:DVB-T Signal ConditionSignal LevelChannelSignal ConditionBit Error Rate 0.00E-06409696These bars show the maximum signal value of theselected channel.[DVB-T Manual Tuning]Searches for the Digital TV channels manually.All channels found will be added to the Channel List.Select a channel position, then start tuning.DVB-T Manual TuningChannel 40ScanSignal ConditionSignal Level0%9696AntennaOKAccessChange