Panasonic VIERA TH-42PX70A Operating Instructions Manual

Also see for VIERA TH-42PX70A: Brochure & specs

Contents

Panasonic VIERA TH-42PX70A Operating Instructions Manual Manual pdf 15 page image

AdvancedMenu Item Adjustments / Confi gurations (options)PictureAdvancedPCSettingsW/B High R White balance of bright red areaandrepeatedly adjustedW/B High B White balance of bright blue areaW/B Low R White balance of bright red areaW/B Low B White balance of dark blue areaGamma (2.0 / 2.2 / 2.5 / S Curve)Reset PCSettings Press the OK button to reset to the default settingsSetupPCSetupInputResolutionSwitches to a wide view• VGA (640 × 480 pixels), WVGA (852 × 480 pixels),XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)• Options change depending on signalsClock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock Phase Eliminates flicker and distortion• Adjust after Clock adjustment • Set to the minimum level if noise occursSyncPC sync signal type (H & V / On G)• H & V : Horizontal and Vertical sync from your PC (Most common sync format)On G : Sync on Green sync from your PCReset PCSettings Press the OK button to reset to the default settingsMenu Item AdjustmentsSetupDVI PositionSettingsH-posAdjusts horizontal positionV-posAdjusts vertical positionResetDVI PositionSettingsPress the OK button to reset to the default settingsASPECTRETURNEXITMENUOPTION DIRECT TV RECVCR1 324 657 980INPUTOKInput SelectionAV1AV2AV3AV4PCHDMI1HDMI2TV28 29• HDMI Functions• Displaying PC Screen on TV■ To return to TVDisplaying PC Screen on TVSelect the external inputSelect “PC”2The screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected. To connect PC (p. 32)• Corresponding signals (p. 36)• If “H-freq.” or “V-freq.” is shown in red,the signals may not be supported.■ PC menu setting (changed as desired)• To make settings “How to Use Menu Functions” to (p. 18)• Other items p. 20 and p. 211selectaccess(∗1): The HDMI logo is displayed on HDMI-compliant equipment.(∗2): Enquire at your local digital equipment retailer shop.HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment.HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVDplayer, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.About connections, see “External Equipment” (p. 32).Note• HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.• Audio settings can be made on the “HDMI1 Input” menu screen. (p. 20)• Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz• HDMI2 terminal is for digital audio signal only.• Use with a PC is not assumed.• If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.• These HDMI connectors are “type A”.• These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyrightprotection.• An equipment having no digital output terminal may be connected to the input terminal of either “Component”,“S-VIDEO”, or “Video” to receive analogue signals.• The HDMI input terminal can be used with only the following image signals:480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.• For details of the applicable HDMI signals, see p. 36.HDMI Functions■ DVI Position SettingsIf the picture position is not fit to the screen during the DVI connection, adjust the position on “DVI PositionSettings” in Setup Menu. The settings are memorized for each HDMI terminals and input signals.• To make settings “How to Use Menu Functions” to (p. 18)■ DVI connectionIf the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal(HDMI1: use AUDIO IN terminals).