6Accessories / OptionsDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.●Do not use the pedestal for any other TV or displays.Otherwise the TV or the display may fall over and become damaged, and personal injury may result.●Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal while it is physically damaged, personal injury may result. Contact your● nearest Panasonic dealer immediately.During set-up, make sure that all screws are securely tightened.If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal● will not be strong enough to support the TV, and it might fall over and become damaged, andpersonal injury may result.Ensure that the TV does not fall over.If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over● and personal injury may result.Two or more people are required to install and remove the TV.If two or more people are not present, the TV may be dropped, and personal injury may result.●Attaching the pedestalAssembly screw (silver) Assembly screw (black) Pole (2) BaseM5 × 25 (4)● ( TH-P58S20Z)M5 × 30 (4)● ( TH-P58S20Z)(TH-P58S20Z)L RM5 × 30 (6)● ( TH-P65S20Z)M6 × 25 (4)● ( TH-P65S20Z) (TH-P65S20Z)Allen wrench( TH-P65S20Z)Assembling the pedestalUse the assembly screws to fasten the poles to thebase securely.Make sure that the screws are securely tightened.● Forcing the assembly screws the wrong way will strip the● threads.Securing the TVInsert the pole into the TV, and thenfasten securely with the assemblyscrews .Tighten the four assembly screws● loosely at first, then tighten themfirmly to fix securely.Carry out the work on a● horizontal and level surface.(TH-P58S20Z) (TH-P65S20Z)- LDC- RC AFrontDCCEAFrontDB(View from the bottom)Hole forpedestalinstallationArrowmark“L” or “R” mark is stamped● on the bottom of the pole. Use the allen wrench● totighten the screws.