16 English3 Select the type of [Home Screen]The demonstration to explain how to use [my HomeScreen] is displayed. Confirm the demonstration byfollowing the on-screen instructions, and then select thedesired [Home Screen].Example: [Home Screen Selection]Example: [TV Home Screen]Auto Setup is now complete and yourTV is ready for viewing.If tuning has failed, check the connection of the network,RF cable, and then follow the on-screen instructions.Note● The TV will automatically go into Standby modewhen no operation is performed for 4 hours if [AutoStandby] in the Timer Menu is set to [On].● The TV will automatically go into Standby mode whenno signal is received and no operation is performedfor 10 minutes if [No signal Power off] in the TimerMenu is set to [On].● To retune all channels[Auto Setup] in [Tuning Menu] (Setup Menu)● To initialise all settings[Shipping Condition] in [System Menu] (SetupMenu)First time Auto SetupAutomatically sets up the TV and searches for availableTV channels when the TV is turned on for the first time.● These steps are not necessary if the setup has beencompleted by your local dealer.● Please complete connections (p. 10 - 12) andsettings (if necessary) of the connected equipmentbefore starting Auto Setup. For details of settings forthe connected equipment, read the manual of theequipment.1 Plug the TV into mains socket andturn power on● Takes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Example:Please select your viewing environment.Home Shop■ How to use remote controlMove the cursorAccess the item / store the settingReturn to the previous item (if available)Select [Home]Select [Home] viewing environment to use in your homeenvironment.● [Shop] is for shop display.● To change viewing environment later on, you willneed to initialise all settings by accessing ShippingCondition.Set up the network connectionSelect your country● Auto Setup screen varies depending on the countryand the signal mode.Select your region