Panasonic VL-GC3700BX Operation Instruction Manual

7・Do not install the product in locations that are suspect to suddenchanges in temperature. Failure to do so may cause condensati-on to form on the product causing malfunction.・In areas surrounded by a high electrical field, disturbances mayoccur in the product's image or sound.2.6 Disclaimer・ Recorded data may be altered or deleted as a result of incorrectoperations, exposure to static electricity, accidents, malfunctio-n,repairs or other operations. To the maximum extent permittedby applicable law, Panasonic assumes no liability for any director indirect damages resulting from the loss or alteration ofrecorded data.・ To the maximum extent permitted by applicable law, Panasonicassumes no responsibility for injuries or property damage resul-ting from failures arising out of improper installation or operati-on nconsistent with this document.・ To the maximum extent permitted by applicable law, Panasonicwill not be held responsible for any damage or loss due to non-performance or delay in performance, error or failure of networkand/or any products.・ Before attempting to connect or operate this product, pleaseread the nameplate on the bottom or rear of the product.・ When you leave the product unused for a long period of time,unplug it from the power outlet.・ If you stop using this product, remove it from the walls to prev-ent it from falling off.2.7 Other important information・ When power fails, this product cannot be used.・ Panasonic may not be liable for damages due to external factorssuch as power failures.8・The recorded images may be lost when:‒ Mishandled‒ Electric shock or radio wave interference occurs.‒ The power is turned off during use.・ In the event of problems, you should contact your equipmentsupplier in the first instance.・ After removing the product and any included items from thepackaging, store, dispose, or recycle the packaging as necessary.Note that certain types of packaging may be a suffocation orchoking hazard.2.8 General Information3.Discription of external view3.1 Front view of the product3.2 Interface DescriptionPower interface: It can be connected to DC12~ 27V, and supportSPOE power supply.Network interface: It is used for connection between the equipmentand the network, and provides 10/100M self-adaption.