Panasonic VL-SVN511 SERIES Operating Instructions Manual

Also see for VL-SVN511 Series: Installation guide Operating instructions Installation guide Manual Quick start guide

3.3 Setting the language, date andtimeWhen you use the main monitor for the first time, you willbe prompted to set the display language, date, and timesettings.R The notification indicator flashes if these settings arenot configured.R The language setting is available for EX and FXmodels only.1 Press the M N button to turn on the display.2 Use the navigator key ( ) to select the desiredlanguage.3 Press the soft key under the soft key icon.4 Press again.5 Set the date and time.R Press the left or right side of the navigator key( ) to select an item (i.e., year, month, day,etc.).R Press the top or bottom side of the navigator key( ) to change the setting.6 When finished, press .R A beep sounds and the display turns off.Changing the language, date and timeYou change the language, date, and time settings laterif desired. From the top menu, use the navigator key andto navigate to “Change settings” ®“Initial settings”.Note:R The date and time settings may be deleted whenthere is a power outage. In this case, reconfigure thesettings.R The time may become out of sync over time (about60 seconds per month).3.4 Wide/zoom settings and zoomposition settingsYou can configure how doorphone images are initiallydisplayed on the main monitor. Images can be displayedin wide mode or in zoom mode. You can choose differentsettings for when visitors call you, and for when you aremonitoring.Wide mode(default setting) Zoom modeWide mode(default setting) Zoom modeImages are not zoomed.The full camera image isdisplayed.Images are zoomed.Images are displayed 2times larger than widedisplay.Note:R The zoom feature uses a digital zoom. As a result,the image quality of zoomed images is lower thanwide display images.R You can switch between wide and zoom modes andadjust the zoom position while monitoring or on a call.See page 17.Selecting wide or zoom1. Top menu ® select ® .2. Select “Initial settings” ® .3. Select “Wide/Zoom settings” ® .R If there are multiple doorphones, select thedoorphone to be configured ® .4. Select the desired setting ® .– “When visitors come”: Your settings will beused when you answer calls from visitors.– “When monitoring”: Your settings will be usedwhen you are monitoring.5. Select the desired display mode ® .R A beep sounds and the settings are changed.6. Press M N.Note:R If you select “Zoom”, adjust the zoom position so thatpeople or objects that you want to view are displayedcentrally in the screen.R When images are recorded in zoom mode, only thezoomed area is recorded.Selecting the zoom position (pan/tilt position)You can select which area of the image is displayedwhen displaying zoomed images.1. Top menu ® select ® .2. Select “Initial settings” ® .3. Select “Zoom position settings” ® .R If there are multiple doorphones, select thedoorphone to be configured ® .R A zoomed image from the doorphone isdisplayed.4. Select the desired zoom position ® .R A beep sounds, the settings are changed, and thedisplay turns off.Note:R If you do not perform any operations for 90 secondswhile changing this setting, the setting is cancelledand the screen turns off.113. Preparation