Panasonic VL-V900 Installation And Operating Instructions Manual

Also see for VL-V700: Installation guide Quick start guide Installation and operating instructions

Panasonic VL-V900 Installation And Operating Instructions Manual Manual pdf 50 page image

5 Enter a feature number to specify the terminal’s operation mode.Feature number Description00# (default) For the emergency terminalSelects EMERGENCY TALK mode. During anemergency call, the main monitor can talk to theemergency terminal (up to 10 minutes).For terminals 1–4Selects NORMAL TERMINAL mode. The terminalcannot be used as a reception terminal.01# For the emergency terminalSelects EMERGENCY NOTICE mode. During anemergency call, the emergency terminal receives arepeating emergency announcement.For terminals 1–4Selects RECEPTION TERMINAL mode. The terminalcan be used as a reception terminal.6 Hang up.Note:R A compatible main monitor, such as the VL-MVN511, is required to make emergency calls to the emergencyterminal.Deleting a terminal assignmentUse this procedure to stop using a terminal with the system.1. Dial the extension number assigned to the control box.2. Enter a feature number to specify which terminal will be deleted.Feature number Description##*0# # Emergency terminal##*1# # Terminal 1##*2# # Terminal 2##*3# # Terminal 3##*4# # Terminal 43. Hang up.5.5 Main monitor programmingUse this procedures in this section to configure the following settings. Perform this procedure for each main monitor.– Set the main monitor to apartment mode– Set the room number– Set the floor number– Set lift permissions for visitorsNote:R You can also use PC programming to configure these settings for each main monitor.R Operations vary depending on the model number of the main monitor.When programming the VL-MVN5111. Press and hold the second soft key button from the left, M N, and M N at the same time (3 buttons total).R Continue to hold the buttons and perform the next step.2. Press and hold the MRESETN button for about 3 seconds, then release the MRESETN button only.R The main monitor starts up and enters programming mode.505. Programming