5. Installation DiagramTrepanning a hole(large than the embedded box size and no morethan the equipment size: 168*93mm).Insert the embedded box in the hole, and fix it with the cement slu-rry.Connect wires, fix the outdoor station on the pre-embedded boxand locked it with M3 screws, then install finished.・The door station shall not be installed in the sun exposure, rain,high temperature, snow/frost,too much dust or strong magneticfield environment.・The door station camera shall avoid direct sunlight to preventpoor image quality.・When the door station is installed, it is recommended that thecamera be about 145cm from the ground.・The lighting at night shall be taken into account during the install-ation of the door station.・The door station shall not be installed in the place where the back-ground noise is more than 70dB.CAUTION96. Technical Parameters7. Function CharacteristicsExternal dimensionsParametersEmbedding box dimensionsOperation voltageWeight :Maximum power consumptionStatic power consumptionOperating temperature・It is made of cast aluminum material/tempered glass and hasanti-explosion and waterproof function.・It has the night light capturing function, video image processingfunction and better intercom quality.・Support the equipment displacement alarm.・Support power distributor.93 x 163 x 82Value75 x 150 x 5012 - 27VDC0.35 kg≤6W≤3W-40℃ - 70℃IP548. Production IntroductionsThe visitor directly presses the call button on the villa door stationto call the corresponding room monitor, for video intercom, unlock-ing and other operations. When the room monitor implements theunlocking operation, the door station will give a beep sound whichmeans opened.8.1 Outdoor Unit Calls Indoor UnitIP Grade10