Panasonic VL-VF580 Operating Instructions Manual

Contents

3.1.6 Wiring schematic diagramBasic systemMonitor Door station4-wireAC adaptorELECTRICLOCKTERMINATION(SHORT)MONITORMONITOR /DOOR STATION1 : +V2 : G3 : AU4 : Vi5 : D1 : +V2 : G3 : AU4 : Vi5 : DMONITOR / SWITCHERViAUG+VL+ L-Fully expanded systemMonitor 1 Monitor 2*1 Monitor 3*1Door station 1 Door station 2*1AC adaptor5-wire4-wire4-wire5-wireSwitchbox* 1ELECTRICLOCKTERMINATION(SHORT)MONITOR1 : +V2 : G3 : AU4 : Vi5 : D1 : +V2 : G3 : AU4 : Vi5 : DTERMINATION(SHORT)MONITOR1 : +V2 : G3 : AU4 : Vi5 : D1 : +V2 : G3 : AU4 : Vi5 : DTERMINATION(SHORT)MONITOR1 : +V2 : G3 : AU4 : Vi5 : D1 : +V2 : G3 : AU4 : Vi5 : D*2MONITOR / SWITCHERELECTRICLOCKMONITOR / SWITCHERMONITOR /DOOR STATIONMONITOR /DOOR STATIONMONITOR /DOOR STATIONElectric lock 2Electric lock 1 *2AC adaptor AC adaptorBA AViAUG+VL+ L-ViAUG+VL+ L-AC adaptor*1 Optional products*2 User supplied. The wiring schematic shown here for the electric locks is only an example. Refer to the wiringinstructions provided with your electric lock. When using an electric lock, select a device that meets the followingguidelines.R Electric lock connection terminal (L+/L-): 12 V DC, less than 1.5 AWire type and distance (between the monitor and the door station)When the multiple monitors are connected in a series, the maximum distance between the door station and the lastmonitor in the series ("Door station 2" and "Monitor 3" in the illustration above) is 100 m.From - To Max. distance Cable standard Cable type referenceDoor station - Monitor 50 m 0.5 mm² RVV4 (4-wire)100 m 0.75 mm²Electric lock - Door station 5 m 1.0 mm² RVV2 (2-wire)10 m 1.5 mm²Monitor - Monitor 50 m 0.5 mm² RVV6 (6-wire)100 m 0.75 mm²Installing multiple monitorsWhen installing multiple monitors, remove the jumpers (A) attached to the "TERMINATION (SHORT)" terminals ofthe monitors ("Monitor 1 and 2" in the illustration above). Leave the jumper (B) of the last monitor in the series("Monitor 3") attached.83. Preparation