Panasonic VL-VN1700 Installation Manual

Also see for VL-VN1700: Operating manual

Contents

Panasonic VL-VN1700 Installation Manual Manual pdf 44 page image

3. The Web Maintenance Console login screen is displayed. Log in with the specified account name andpassword to launch Quick Setup Wizard. For details about Quick Setup Wizard, see "4.4.1 Quick SetupWizard".4.4 Programming the Control Box4.4.1 Quick Setup WizardIn Quick Setup Wizard, you configure the mandatory settings for the Control Box. When you log in to WebMaintenance Console and the Control Box is in its initialised, factory default state, Quick Setup Wizardstarts automatically. You must log in using the following user name and password.– The user name is "INSTALLER".– The default password is "1234".Welcome to Panasonic VL-VN1700On this screen, you can either import a previously configured system data file or proceed to manuallyconfigure the Control Box’s settings.To import a previously configured system data file1. Log in to Web Maintenance Console (interactive mode).2. Click File Import.3. In Offline Data Import screen, click Browse, and then select a preconfigured DNSYS file.4. Click Execute.5. When you are prompted to restart the Control Box, click OK.To configure the Control Box’s settings manually1. Click Install next to installation setup.2. On the screen that appears, specify the settings as explained below.UM Prompt Setting– Language: Select your language from the drop-down list.Password SettingAn administrator account with the user name "97000" and the password you specify here will becreated.– Installer password: Enter a new password (except default password).– Re-enter: Enter the new password (except default password) again for confirmation.3. Click Start Setup Wizard, and then continue the configuration.Date & TimeOn this screen, you can specify the settings for the system date and time.When you have finished specifying the settings, click Next to continue.System Time• Time Zone: Select the time zone from the drop-down list.• Local Time: Click the Local Time box, and then specify the date and time.SNTP Setting• IP Address: Enter the IP Address or host name of the SNTP Server.4.4 Programming the Control Box44 Installation Manual