Panasonic VW-CLT2 Owner's Manual

Contents

Panasonic VW-CLT2 Owner's Manual Manual pdf 3 page image

∫ About the Handling of the 3D ConversionLens≥ Sand or dust will cause malfunctions in the 3DConversion Lens. Be careful not to allow sand ordust to get inside the 3D Conversion Lens whenusing at the beach or similar.≥ The 3D Conversion Lens is not waterproof. Wipewith a dry cloth if any water gets on it.Contact the retailer or the service center when itdoes not operate properly.≥ Image may be affected when the surface of theprotective panel is contaminated by water, oil,fingerprints, etc. Wipe the surface of the protectivepanel gently with a dry soft cloth before and after therecording.≥ Remove the 3D Conversion Lens from the videocamera and place it in the lens storage bag when∫ About Condensation (When the 3DConversion Lens is Fogged Up)≥ Condensation occurs when there is a difference in thetemperature or humidity as in the following cases. Becareful since it may cause contamination, mold, ormalfunction of the 3D Conversion Lens.j When it is carried indoors from a cold outdoorenvironmentj When carried out from a cool, air-conditioned car,etc.j When cool wind from an air conditioner is directlyblown onto the lensj In an area with high humidity≥ To prevent condensation, place in a plastic bag andallow it to warm up to the ambient temperature. If anycondensation occurs, leave it as it is forapproximately 1 hour. Condensation will disappear onTo Avoid Malfunctions EnglishVQT4A75_P_eng__lsp.book 3 ページ２０１１年１２月１４日水曜日午後５時１分