Panasonic Viera TC-32LX34 Owner's Manual

Also see for Viera TC-32LX34: Service hints Owner's manual Guías del usuario

Contents

Panasonic Viera TC-32LX34 Owner's Manual Manual pdf 12 page image

12First Time SetuporTurn the TV On with the POWER buttonor(TV) (Remote)Configure your viewing modeSelect your languageLanguage / Idioma / LangueEnglish Español Français selectOKSelect your viewing mode (Be sure to select “Home use”)Set viewing mode Step 2 of 6Home Use Store DemonstrationOKRETURNSelectselectOKPlease confirm your selection (Home Use) before pressing OK button.If you select “Store Demonstration” by mistake in ,confirmation screen will be displayed.NoYou are selecting the store demonstration mode.If you select “Yes”, the picture mode will regularly resetto “Vivid” and a Picture Refresh message will be displayed on thescreen.Yes selectOKSelect “No” and return to previous screen .If you select “Yes”, Screen enters the store demonstration mode.To display the “Set viewing mode” screen again as shown above and select“Home Use”, do one of the following:• Press and hold down the side POWER button for at least five seconds.• Unplug power cord for 30 seconds and plug it again.NoteIf you use any other step other than then turn the TV off, or if you used the EXITbutton to quit before completing the settings, the next time you turn the TV on, “Firsttime setup” will not be automatically displayed.• The settings up to that point are saved.• You can start “First time setup” at any time. (p. 34)Language, ANT/Cable setup, Input labels, Clock can also be changed from theSettings Menu. (p. 34)First time setup screen is displayed only when the TV is turned on for the first time after the power cord isinserted into a wall outlet and when “Auto power on” (p. 34) is set to “No”.