Panasonic Viera TC-50PS14 Operating Instructions Manual

Also see for TC-54PS14 - 54.1" Plasma TV: Quick setup guide Operating instructions Manual de instrucciones Operating instructions Service manual

Contents

Panasonic Viera TC-50PS14 Operating Instructions Manual Manual pdf 17 page image

17Menu Item Adjustments/Configurations (alternatives)SetupChannel surf modeSets the mode to select the channel with Channel up/down button(All/Favorite/Digital only/Analog only)• Favorite: Only channels registered as FAVORITELanguage Selects the screen menu languageClock Adjusts the clockANT/Cable setup Sets channelsConnecteddevices Input labels Selects the terminal and label of the external equipmentAnti Image retentionPixel orbiterPrevents “Image retention” with Wobbling. (Automatic/Periodic)• Automatic: Shifts the display image automatically.• Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the“Time (minutes)” menu.Time (minutes) Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4)4:3 side bars Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)• The recommended setting is “Bright” to prevent panel “Image retention”.Scrolling bar Press “OK” to start horizontal “Scrolling” on the screenVIERA Link settingsVIERA LinkControls equipment connected to HDMI terminals (On/Off)• “Power off link”, “Power on link”, “Stand-by power save”, “Auto power stand-by” and “Defaultspeakers” cannot be selected if “Off” is set.Power on link Sets “Power on link” of HDMI connection equipment (Yes/No)Power off link Sets “Power off link” of HDMI connection equipment (Yes/No)Stand-by powersave Set “Stand-by power save” of HDMI connection equipment. (No/Yes)Auto powerstand-bySet “Auto power stand-by” of HDMI connection equipment.(No/Yes (with reminder)/Yes (no reminder)Defaultspeakers Selects the default speakers (TV/Theater)ECO/power savingNo signal for 10minutesTo conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION isperformed for more than 10 minutes. (Enable/Disable)Note• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digitalchannel.• “No signal for 10 minutes was activated” will be displayed for about 10 seconds when theTV is turned on for the first time after turning the power off by “No signal for 10 minutes”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior tothe shut-off.No activity for 3hoursTo conserve energy, the TV automatically turns off when no operation of remote or side panelkey continues for more than 3 hours. (Enable/Disable)Note• Not in use when setting “Auto power on”, “On/Off Timer” or PC input display.• “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV isturned on for the first time after turning the power off by “No activity for 3 hours”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior tothe shut-off.AdvancedsetupAuto power onTurns TV On automatically when the cable box or a connected device is turned On (No/Yes)TV AC cord must be plugged into this device. TV comes on every time the power is restored.• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on”is set.Play SD cardautomaticallySet “Thumbnail” or “Slideshow” to play back SD cards automatically.(Slideshow/Thumbnail/Set later/Off)About Displays TV version and software license.Reset to defaults Performing Reset will clear all items set with Setup, such as channel settings.Menu Item Adjustments/Configurations (alternatives)SetupSUB MENUChannel surf mode Sets the mode to select the channel with Channel up/down button(All/Favorite/Digital only/Analog only)Set favorite Sets favorite channels.Edit CH caption Changes the station identifier.Signal meter Checks the signal strength if interference or freezing occurs on a digital image.(Continued)■ Menu list■ Sub menu list