Panasonic Viera TC-L32C3 Owner's Manual

Also see for VIERA TC-L32C3: Service hints Owner's manual Service manual Manual de usuario

Panasonic Viera TC-L32C3 Owner's Manual Manual pdf 34 page image

34Setup Other function settingsSettings Items Item DescriptionChannel surfmodeAll/Favorite/Digital only/Analog onlySets the mode to select the channel with the Channel up/down button.Favorite: Only channels registered as FAVORITE. (p. 16)Language English/Español/FrançaisSelects the screen menu language.Clock Adjusts the clock. (p. 14)ANT/Cable setup See p. 28-29 for more detail.Input labels(Display labelsof connecteddevices)Selects the terminal and label of the external equipment.Devices connected to external input terminals can be labeled for easier identification during theinput selection. (Input select (p. 19))Terminals: HDMI 1-2/Comp./Video 1/Video 2/PCLabel: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/GAME/COMPUTER/VCR/CABLE/SATELLITE/DVR/CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/OTHER• You can also enter the label name directly. (Entering characters (p. 17))VIERA Link settings See p. 24-25 for more detail.ECO/energysavingPower save(Standard/Saving)Reduces screen brightness to lower power consumption. Eye-friendly forviewing in a dark room.No signal for 10minutes(Stay on/ PowerTV off)To conserve energy, the TV automatically turns off when NO SIGNAL and NOOPERATION continue for more than 10 minutes.• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.• “No signal for 10 minutes was activated” will be displayed for about 10 secondswhen the TV is turned on for the first time after the power was turned off by “Nosignal for 10 minutes”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remainingminutes prior to the shut-off.No activity for 3hours(Stay on/ PowerTV off)To conserve energy, the TV automatically turns off when no operation of remote andside panel key continues for more than 3 hours.• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while“PC inputs” is selected.• “No activity for 3 hours was activated” will be displayed for about 10 seconds whenthe TV is turned on for the first time after the power was turned off by “No activityfor 3 hours”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remainingminutes prior to the shut-off.Advanced setup Auto power on(No/Yes)Turns TV On automatically when the cable box or connected device is turned On.TV AC cord must be plugged into this device. TV turns on every time the power is restored.Image viewerauto playSlideshow/Thumbnail/Set later/OffSets the playback type to play back SD cards automatically.Set later: “Image viewer settings” menu will be displayed repeatedly.“Viewing photos with VIERA IMAGE VIEWER” (p. 20)First time setup Restarts the first time setup from “Language” setting. (p. 12)About Displays TV version and software license.Reset to defaults Performing Reset will clear all settings made with Setup, such as channelsettings.• Password setting/entering (p. 17)