12First Time SetupOKPOWERorTurn the TV On with the [POWER] buttonor(Remote)(TV)Configure your viewing modeSelect your languageEXIT ExitLanguage / Idioma / LangueEnglishEspañolFrançaisStep 1 of 5Select NextSelect your languageSeleccione su idiomaSélectìon de la langueSelectOKSelect your viewing mode (Be sure to select “Home Use”)Select Next ReturnSet viewing modeStore DemonstrationStep 2 of 5BackPlease select your viewing environment.Select “Home Use” when using this TV in your home.Home UsePlease select your viewingenvironment.SelectOK● Please confirm your selection (Home Use) before pressing the [OK] button.■If you select “Store Demonstration” by mistake in ,confirmation screen will be displayed.SelectOKYou are selecting the store demonstration mode.NoYesIf you select “Yes”, the picture mode willregularly reset to “Vivid” and a Picture RefreshMessage will be displayed on the screen.Select OK● Select “No” and return to previous screen .● If you select “Yes”, screen enters the store demonstration mode.To display the “Set viewing mode” screen again as shown above and select“Home Use”, perform “Reset to defaults” in the “Setup” menu (p. 31)● If you perform “Reset to defaults”, please do not unplug the AC Cord while theTV is being reset.The first time setup screen is displayed when the TV is turned on for the first time after the power cord isinserted into a wall outlet.