Panasonic Viera TC-L42ET5W Operating Instructions Manual

Also see for Viera TC-L42ET5W: Service manual

Contents

Link Functions (VIERA Link)69Reduce unnecessary power consumption in Standby [Standby Power Save]Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 37)The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation with theTV on / off state to reduce the consumption.When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption ofthe connected equipment is automatically minimised.When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased to makestartup time fast.● This function is effective if the connected equipment can change the power consumption in Standby mode and is set to higherconsumption.● This function works when [Power off Link] is set to [On].Auto standby for unnecessary equipment [Intelligent Auto Standby]Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function[Intelligent Auto Standby] (p. 37)When the TV is on, non-watched or non-used connected equipment goes into Standby mode automatically to reduce the powerconsumption. For example, when the input mode is switched from HDMI or when Speaker Selection is changed to [TV] (exceptfor watching a disc).● If you select [On (With reminder)], the on-screen message will be displayed before the connected equipment turns to standby.● This function may not work properly depending on the connected equipment. If required, set to [Off].Control the menu of the connected equipment by VIERA remote control[VIERA Link Control]You can control some functions of the connected equipment with this TV remote control pointing at the TV’s signal receiver.● If you cannot operate, check the settings and the equipment.“Summary of features” (p. 66, 67), “Preparations” (p. 68)● For details of the operations for the connected equipment, read the manual of the equipment.1 Display [VIERA TOOLS] and select [VIERA Link]VIERA Linkselectaccess