Panasonic Viera TC-L47E5 Owner's Manual

Also see for Viera TC-L32E5: Service manual Service manual Manual de usuario

Panasonic Viera TC-L47E5 Owner's Manual Manual pdf 15 page image

Getting started15• First Time Setup• Identifying ControlsFirst Time SetupPOWEROKorTurn the TV On with the POWER button(TV) (Remote)orPOWERConfigure your viewing modeSelect your languageLanguage / Idioma / Langue Step 1 of 7 / Paso 1 de 7 / Étape 1 de 7OKSelectSelecciónSélectionEnglish Español FrançaisSelect your languageSeleccione su idiomaSélection de la langueOK selectOKSelect your countryStep 2 of 7RETURNOKSelectCountrySelect the country where this TV is being used.U.S.A. Canada Other OK selectOKSelect your viewing mode (Be sure to select “Home use”)Step 3 of 7RETURNOKSelectSet viewing modeHome use Store DemonstrationSelect your viewing environmentOK selectOK● Please confirm your selection (Home Use) before pressing OK button.■If you select “ Store Demonstration” by mistake in ,confirmation screen will be displayed.NoYou are selecting the store demonstration mode.If you select “Yes”, the picture mode will regularly resetto “Vivid” and a Picture Refresh message will be displayed on thescreen.Yes OK selectOK● Select “No” and return to previous screen .● If you select “Yes”, screen enters the store demonstration mode.To display the “Set viewing mode” screen again as shown above and select“Home use”, do one of the following:• Press and hold down the rear POWER button for at least five seconds.• Unplug power cord for 30 seconds and plug in again.Note● If you use any other step other than then turn the TV off, or if you used the EXITbutton to quit before completing the settings, the next time you turn the TV on, “Firsttime setup” will not be automatically displayed.• The settings up to that point are saved.• You can start “First time setup”. (p. 53)● Language, ANT/Cable setup, Input labels, Clock can also be changed from theSettings Menu. (p. 52)The first time setup screen is displayed only when the TV is turned on for the first time after the power cordis inserted into a wall outlet and when “Auto power on” (p. 53) is set to “No”.