Panasonic Viera TC-P42G25 Operating Instructions Manual

Also see for Viera TC-P54G25: Service manual Troubleshooting handbook Operating instructions Operating instructions Manual de instrucciones

Panasonic Viera TC-P42G25 Operating Instructions Manual Manual pdf 45 page image

45AdvancedNetwork Settings[IP setting]Select “IP setting mode” and set to“Automatic”Manual settingSelect “IP setting mode” and set to “Manual”Select the item and press OKCheck the specifications of the broadband routerand enter each IP address(When IP automatic acquisition in DHCP can be used)Menu IP address/DNS settings 1/2IP setting modeIP address 192.168.0.5Subnet mask 255.255.255.0Default gateway 192.168.0.254AutomaticThe acquired address is displayed.selectOK Subnet mask OK10 I0 . 0 . 0 . 0changechannelOKorEach IP address is acquired automatically[DNS settings]Select “DNS setting mode” and set to “Automatic” Manual settingSelect “DNS setting mode” and set to “Manual”Select the item and press OKEnter each IP address as was specified by theprovider(When DNS automatic acquisition in DHCP can be used)Menu IP address/DNS settings 1/2IP setting modeIP setting mode AutomaticManualDefault gateway 192.168.0.254DNS setting mode OKPrimary DNS 192.168.0.20AutomaticSecondary DNS 192.168.0.21The acquired address is displayed.selectOKPrimary DNS 10 I0 . 0 . 0 . 0selectOKorEach IP address is acquired automaticallyIf you are using a broadband router, IP automatic acquisition in DHCP can beused under normal circumstances. If you are not sure, check with the personwho installed the equipment, or check the instructions for each device.Set only if specified by the provider.It is not required for normal household use.Proxy addressThis is the address of the relay server that is connected to the targetserver instead of the browser and sends data to the browser.Setting is only required if specified by the provider.Select “Proxy address” and press OKProxy portThis number is specified by the provider together withthe Proxy address.Select “Proxy port” and press OKEnter the Port numberProxy port 0selectOKorAllows manual entry of proxy address for relayserver. (normally not required)Menu VIERA CAST settingProxy address0Proxy portselectOKEnter address(see “Entering characters” on p. 19)Proxy addressprIoSelect “OK”If you perform the Proxy settings, it may make itimpossible to view VIERA CAST movie content.Network camera setting (p. 29)Select “Software update” Press OK to start the Software update screenFollow directions on the screen* Set “Clock” first. (p. 17)Check if software update for the TV isavailableVIERA CAST settingNetwork cameras listSoftware updateMac addressIP address/DNS settings00-0b-97-7c-65-e9Menu Network settingsConnection testNetwork connection Wireless (WiFi)selectOK(continued)The Network settings become effective when you close the menu and run “Connection test”.