Panasonic Viera TC-P42U2 Quick Start Manual

Also see for Viera TC-P42U2: Quick setup guide Operating instructions Manual de instrucciones Quick setup guide Service manual

15Quick StartGuide First Time SetupPress to return tothe previous screenAuto channel setup (ANT/Cable setup)Select the connected Antenna in terminalANT/Cable setup Step 3 of 6Select “Not used” when viewing TV viaSatellite receiver or Cable box. Note: Select“Cable” when viewing via Cable DTA Box.Cable Antenna Not usedANTENNACable InANTENNACable InOKRETURNSelectselectOKNot used: Go to(Label inputs)Select “Not used” when no wire is connected to the “Antenna/Cable” terminal.Typical when a Cable/Satellite box is connected to a TV input.Prevents accidental tuning to an unavailable signal.Select “Start”Auto program Step 4 of 6Start scanning for channels via the TV’sbuilt-in tuner. Select “Skip” when viewing TVchannels via Satellite receiver or Cable box.Start SkipOKRETURNSelectselectOKSkip: Go to(Label inputs)Start scanning the channels(Available channels are automatically set.)Auto programProgressNumber of analog channelsNumber of digital channelsPress RETURN to quit8%100RETURNComplete the Auto program setupCompletion message is displayed when the Auto program scan is successfullycompleted.Auto programAuto program completed.Press OK to continue.Number of analog channelsNumber of digital channels100OKRETURNOKIf there is no availablechannel, return to -(ANT/ Cable setup).“Not used” will be selected.Operation of the EXIT button during “First time setup”Press the button once to display confirmation screen. Press again to closeconfirmation screen.[EXIT confirmation screen]Are you sure you want to exit the First Time Setup?To repeat the First Time Setup, select“First time setup” in the Setup Menu.Yes NoYes Exit “First time setup”No Return to the original screen.