Panasonic Viera TC-P50VT20 Operating Instructions Manual

Also see for Viera TC-P50VT20: Specification sheet Technical guide Service manual Service manual Manual de instrucciones

Panasonic Viera TC-P50VT20 Operating Instructions Manual Manual pdf 8 page image

8Accessories/Optional AccessoryAccessoriesRemote ControlTransmitterN2QAYB000486Batteries for the RemoteControl Transmitter (2)AA BatteryAC cordPedestalTBLX0154Product Registration Card (U.S.A.)Operating InstructionsVIERA Concierge and Quick Start GuideInstalling the remote’s batteriesPull openHook Note the correctpolarity (+ or -).Close CautionIncorrect installation may cause batteryleakage and corrosion, resulting indamage to the remote control.• Do not mix old and new batteries.• Do not mix different battery types(such as alkaline and manganesebatteries).• Do not use rechargeable (Ni-Cd)batteries.Do not burn or break batteries.AccessoriesCheck you have all the items shown.Optional Accessory Please contact your nearest Panasonic dealer to purchase the recommendedwall-hanging bracket. For additional details, please refer to the wall-hangingbracket installation manual.Wall-hanging bracket(angle)TY-WK4P1RWa: 15.7” (400 mm)b: 11.8” (300 mm)Rear of the TVHoles for wall-hangingbracket installationScrew for fixing the TV onto the wall-hanging bracket(not supplied with the TV)Depth of screw:minimum 0.59” (15.0 mm),maximum 1.18” (30.0 mm)(View from the side)a bM8WarningIn order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensedcontractor to secure the wall-hanging brackets.Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps toprevent the TV from tipping over.Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in thewall before hanging bracket.When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connectingcables not to press against the wall when the TV is tilted forward.For safety reasons, remove units no longer being used from their wall-mounted locations.3D Eyewear (p. 22)How to assemble (p. 9)Screwdriver(for 3D Eyewear)