Panasonic Viera TC-P50VT25X Operating Instructions Manual

Also see for TC-P50VT25X: Operating instructions

Panasonic Viera TC-P50VT25X Operating Instructions Manual Manual pdf 5 page image

8 9Quick StartGuide Accessories/Optional AccessoryAccessoriesAssembly screwsA(for 50”)M5 × 18 (Silver) (3)(for 65”)M5 × 30 (Silver) (6)B(for 50”)M5 × 30 (Black) (4)(for 65”)M6 × 25 (Black) (4)Pole (1)(for 50 ” )(for 65 ” )FrontBackBase (1)(for 50 ” )(for 65”)Allen wrench(included tool only for 65”)CAccessories/Optional AccessoryAccessoriesRemote ControlTransmitterN2QAYB000486Batteries for the RemoteControl Transmitter (2)AA BatteryAC cordPedestalTBLX0145 (TC-P50VT25X)Warranty Card (Mexico)Operating InstructionsInstalling the remote’s batteriesPull openHook Note the correctpolarity (+ or -).Close CautionIncorrect installation may cause batteryleakage and corrosion, resulting indamage to the remote control.• Do not mix old and new batteries.• Do not mix different battery types(such as alkaline and manganesebatteries).• Do not use rechargeable (Ni-Cd)batteries.Do not burn or break batteries.Attaching / Removing the pedestal■Assembling the pedestal[TC-P50VT25X (TBLX0145)] [TC-P65VT25X (TBLX0192)]Fix securely with assembly screws A .(Total 3 screws)Tighten screws firmly.Fix securely with assembly screws A .(Total 6 screws)Tighten screws firmly using Allen wrench CAFrontPoleBaseACPoleFrontPoleBase■Set-upCarry out work on a horizontal and level surface.Tighten screws firmly.[TC-P50VT25X]BFix securely with assemblyscrews B . (Total 4 screws)Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom view[TC-P65VT25X]BFix securely with assemblyscrews B . (Total 4 screws)Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom viewRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.Remove the assembly screws B from the TV.Pull out the TV from the pedestal.Remove the assembly screws A from the pole.AccessoriesCheck you have all the items shown.Optional Accessory Please contact your nearest Panasonic dealer to purchase therecommended wall-hanging bracket. For additional details, please referto the wall-hanging bracket installation manual.Wall-hanging bracket(angle) Rear of the TVHoles for wall-hangingbracket installationScrew for fixing the TV onto the wall-hangingbracket (not supplied with the TV)Depth of screw:minimum 0.59” (15.0 mm) (50”),0.55” (14.0 mm) (65”)maximum 1.18” (30.0 mm)(View from the side)a bM8TY-WK4P1RW (for 50”)a: 15.7” (400 mm)b: 11.8” (300 mm)TY-WK6P1RW (for 65”)a: 26.9” (684 mm)b: 11.8” (300 mm)WarningIn order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensedcontractor to secure the wall-hanging brackets.Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps toprevent the TV from tipping over.Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in thewall before hanging bracket.When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connectingcables not to press against the wall when the TV is tilted forward.For safety reasons, remove units no longer being used from their wall-mounted locations.3D Eyewear (p. 22)RS232C terminal SpecificationsHow to assemble (p. 9)Screwdriver(for 3D Eyewear)TBLX0192 (TC-P65VT25X)