10WarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (p. 9)Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.LocationabccAdjust the plasma panel to yourdesired angle.(View from above) ● TC-P42ST30a: 12.1 ” (306 mm)b: 15.8 ” (400 mm)c: 15°● TC-P46ST30a: 9.7 ” (244 mm)b: 18.2 ” (460 mm)c: 10°● TC-P50ST30a: 10.2 ” (258 mm)b: 18.2 ” (460 mm)c: 10°Center of therotation.Note● Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.● Do not pla ce any objects or hands within the full rotation range.Installing the remote’s batteriesPull openHook Note the correctpolarity (+ or -).Close CautionIncorrect installation may causebattery leakage and corrosion,resulting in damage to the remotecontrol.• Do not mix old and new batteries.• Do not mix different battery types (suchas alkaline and manganese batteries).• Do not use rechargeable (Ni-Cd)batteries.Do not burn or break batteries.Power cord connectionTo attach To removeInsert it firmly until thetabs on both sides clickinto place.Keep pushing bothsides until they snapand pull.