Panasonic Viera TC-P60ST30 Owner's Manual

Also see for TC-P60ST30: Specifications Manual de usuario

53AdvancedHow to Use Menu FunctionsSetup Other function settingsSettings Items Item Description3D settings See p.25 for more detail.Channel surfmodeAll/Favorite/Digital only/Analog onlySets the mode to select the channel with the Channel up/down button.Favorite: Only channels registered as FAVORITE. (p. 20)Language English/Español/FrançaisSelects the screen menu language.Clock Adjusts the clock. (p. 17)ANT/Cable setup See p. 46-47 for more detail.Input labels(Display labelsof connecteddevices)Selects the terminal and label of the external equipment.Devices connected to external input terminals can be labeled for easier identification during theinput selection. (Input select (p. 23))Terminals: HDMI 1-3/Component/VideoLabel: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/OTHER/Not used• You can also enter the label name directly. (Entering characters (p. 21))Anti Imageretention(Prevent Imageretention)Pixel orbiter(Wobbling)Enable/Disable Enable: Shifts the display image automatically.4:3 side bars(4:3 mode only)Off/Dark/Mid/BrightChanges the brightness of the side barThe recommended setting is “Bright” to prevent the panel“Image retention”. (p. 58)Scrolling bar Press “OK” to start the horizontal “Scrolling” on the screen.• Press any key except the POWER key to return to previousscreen.• You will return to the previous screen if no key operation hasbeen performed for 15 minutes.[Scrolling bar]Network settings See p. 40-42 for more detail.VIERA Link settings See p. 34-35 for more detail.ECO/energysavingNo signal for 10minutes(Stay on/ PowerTV off)To conserve energy, the TV automatically turns off when NO SIGNAL and NOOPERATION continue for more than 10 minutes.• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.• “No signal for 10 minutes was activated” will be displayed for about 10 secondswhen the TV is turned on for the first time after the power was turned off by “Nosignal for 10 minutes”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remainingminutes prior to the shut-off.No activity for 3hours(Stay on/ PowerTV off)To conserve energy, the TV automatically turns off when no operation of remote andside panel key continues for more than 3 hours.• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.• “No activity for 3 hours was activated” will be displayed for about 10 seconds whenthe TV is turned on for the first time after the power was turned off by “No activityfor 3 hours”.• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remainingminutes prior to the shut-off.Keyboard type Select keyboard type. Operate USB keyboard (p. 21)(U.S./Canadian French/Canadian Multilingual Standard/Spanish (LatinAmerica)/Spanish (Spain))Advanced setup Auto power on(No/Yes)Turns TV On automatically when the cable box or connected device is turned On.TV AC cord must be plugged into this device. TV turns on every time the power is restored.Image viewerauto playSlideshow/Photos/Videos/Music/Set later/OffSets the media contents or playback type to play back SDcards automatically.Set later: “Image viewer settings” menu will be displayed repeatedly.“Using Media player” (p. 26)VIERA ConnectBanner (On/Off)Sets the banner display status.First time setup Restarts the first time setup from “Language” setting. (p. 14)About Displays TV version and software license.Reset to defaults Performing Reset will clear all settings made with Setup, such as channel settings.• Password setting/entering (p. 21)