15DISPLAYINPUTSURROUNDVOLN RPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCMULTIPIP SWAP SELECT MOVEZOOMBasic ControlsSURROUND buttonThe surround setting switches on and off each time the SURROUNDbutton is pressed.The benefits of surround sound are enormous. You can be completelyenveloped in sound; just as if you were at a concert hall or cinema.Note:The surround settings are memorized separately for each AUDIO MENU(STANDARD, AUTO).Standby (ON / OFF) buttonThe LCD Display must first be plugged into the wall outlet and turned on at the power switch (see page 12).Press this button to turn the LCD Display On, from Stanby mode. Press it again to turn the LCD Display Offto Stanby mode.ON OFFINPUT button(INPUT1, INPUT2 and PC IN selection)Press to select INPUT1, INPUT2 and PC IN input SLOTS sequentially.(see page 13)Sound mute On / Off (see page 23)Volume AdjustmentPress the Volume Up “+” or Down “–” button to increase or decreasethe sound volume level.R button (see page 17)Press the R button to return to previous menu screen.ACTION buttonPress to make selections.POSITION buttonsSOUND button (see page 23)SET UP button(see page 16, 17)PICTURE POS. / SIZE button(see page 19)ASPECT buttonPress to adjust the aspect.(see page 18)OFF TIMER buttonThe LCD Display can be preset to switch to stand-by after a fixedperiod. The setting changes to 30 minutes, 60 minutes, 90 minutesand 0 minutes (off timer cancelled) each time the button is pressed.When three minutes remain, “OFF TIMER 3” will flash.The off timer is cancelled if a power interruption occurs.Digital Zoom (see page 24)Press to accessDigital Zoom.This displays an enlargementof the designated part of thedisplayed image.ONSURROUNDZOOMMOVE30 60090