Panasonic Viera TH-37PV7F Operating Instructions Manual

Also see for Viera TH-37PV7F: Service manual

Contents

8 9Quick Start GuideTVPROGRAMMEASPECTINPUTRETURNEXITMENUOKOPTION DIRECT TV RECVCR1 324 657 980REC VCR DVDTEXT F.P. INDEX HOLD• Identifying Controls• Attaching the pedestalCursor buttons to make selections andadjustmentsStandby On / Off switch(Switches TV On or Off standby)Sound mute On / OffChanges aspect ratio (p. 15)Selects programmes in sequenceAccess VIERA Link Menu (p. 33)OK button to confirm selections and choicesPress after selecting programme positions toquickly change programme.VCR / DVD operations (p. 17)VolumeProgramme Information (p. 15)Teletext Index (p. 19)Coloured buttons used for theselection, navigation and operation ofvarious functionsEXIT (Returns to TV screen)DIRECT TV RecordingTo immediately record programme in VCR /DVD recorder with Q-Link connection(p. 30)Programme / channel change buttons (0-9)and Teletext page buttons. (p. 14 and p. 18)When in Standby mode, switches TV On. Option menuSets the preferred settings of viewingand sound options easily (p. 15)Main MenuPress to access VIERA Link, Picture,Sound and Setup menus (p. 20)Viewing a favourite teletext channel (p. 19)Surround (p. 22)Changes the input modeTV - changes TV mode (p. 16)AV - changes AV input mode (p. 16)Returns to the previous menuStill picture (p. 15)Teletext Hold (p. 19)Teletext (p. 18)The TV must be fastened to both a base and a wall.Remove the screws at both top corners on the rear of theTV, and attach the clamps to the TV using the removedscrews.Band (2) Screw (2)Nominal diameter 4 mm × 12Wood screw (2) Clamp (2)Attaching the pedestal■Securing to a baseFix pedestal and base together with band.■Securing to a wallFix to wall or post with strong commercial wire or chain.Remove AttachIdentifying ControlsIncreases or decreases the programmeposition by one. When a function isalready displayed, press to increase ordecrease the selected function. Whenin Standby mode, switches TV On.Remote controlsignal receiverChanges the input modeFunction select• Volume / Contrast / Brightness / Colour /Sharpness / Tint (NTSC mode) / Bass /Treble / Balance / Auto Setup (p. 24)Power LED• Standby: redOn: greenMains power On / Off switch