Setting Up the TV | Connecting the TV6Wall mounting the TV (optional)Choosing to wall mount the TV shall be done at theowner’s risk and expense. Always use a qualifiedinstaller to perform a TV wall bracket installation.Incorrect installation may cause TV to fall, resulting inpersonal injury and product damage that is not coveredby warranty.bRear of the TVScrew for fixing the TV onto thewall-hanging bracket (not supplied)Depth ofscrew(View from the side)a■ Holes for wall-hanging bracket installationa: 200 mmb: 100 mm■ Screw specificationType: M6Depth of screw:Minimum: 11 mmMaximum: 15 mmWarning●When optional accessories such as wall brackets etc.are used, always read and follow the manufacturerinstallation and usage instructions.●Do not mount the unit directly below ceiling lights (suchas spotlights or halogen lights) which typically giveoff high heat. Doing so may warp or damage plasticcabinet parts.●When installing wall brackets you must ensure the wallbracket is not electrically grounded to metal wall studs.Always ensure that there are no electrical cables,pipes etc. in the wall before you begin the wall bracketinstallation.●To prevent fall and injury, remove the TV from its fixedwall position when it is no longer in use.Connecting the TV●Please ensure the TV is disconnected from the mainssocket / power point before attaching or disconnectingany RF / AV leads.●External equipment and cables are for illustrativepurposes only and not supplied with this TV.●Check the type of terminals and cable plugs arecorrect when connecting.●When using an HDMI cable, use the fully wired one.●Keep the TV away from electronic equipment (videoequipment, etc.) or equipment with an infrared sensor.Otherwise, distortion of image / sound may occur oroperation of other equipment may be interfered.●Also read the manual of the equipment beingconnected.TerminalsRear of the TV214351 HDMI 1 - 22 AV IN3 Aerial terminal4 DIGITAL AUDIO OUT5 USB portConnectionsAerial and mains leadRF cableMains lead(supplied)Aerial