Panasonic Viera TH-42PA60AC Operating Instructions Manual

Advanced17• Editing and Setting ChannelsOKSelect the programme numberand search through the channelIf the sound is weak or distorted, change the sound system used for a programme channel. (5.5MHz / 6.5MHz)Select the channel you want to adjust Set this function OKIf the image is strange, change the colour system to the correct transmition signal being received. (Auto / PAL /NTSC 4.43 / NTSC 3.58)Select the channel you want to adjust Set this function OK• Normally, select "Auto"For the small adjustments to the tuning of an individual channel (useful for example when weather conditions areaffecting reception quality of a programme)Select the channel you want to adjust Set this function OK• To cancel Fine tuning, tune again by Manual tuningFor the skip programme numbers which have no tuning datas• This function is only effective when pressing the Programme number up or down button either on the TV unit oron the remote control.Select the channel you want to skip Set "Skip" to "On" OKManual tuningReturnExitSearch down/upProgramme down/upStore1StoresearchProgrammenumberChannelRepeatandNote• If a VCR isconnected withonly the RFcable, selectprogrammenumber "0".• The programmenumber blinks.To freely change settings after Auto setup(Press repeatedly until "Tuning mode" appears)or (Access Tuning menu)(Press repeatedly until "Manual tuning" is reached)or (Access Manual tuning)(Programme, Channel (not displayed), Sound system)or (Change programme, Start searching channels, Change sound system)(Store)- (Repeat)For Manual tuning, using the buttons on the unit("Tuning mode" on p. 7)■ To return to TVManual tuning (Front panel)- , + : SearchTV / AV : Move cursorSTR : To storeF : To exit5. 5MHz15. 5MHzSTR F - / + / TV / AVProgramme number(flash)ChannelSound system(flash)• Not available when Child lock in Setup menu is set(p. 14).select