Panasonic Viera TH-42PE7 Quick Start Manual

Also see for TH-42PE7U: Technical guide Service manual Manual de instrucciones

33AdvancedEditing and Setting ChannelsCaption selectCaptionCaption detail---Apply CancelSignal meterSignal strength1-1ChannelCurrentPeak level30%45%Program channelCableANT inAutoManualSignal meterAuto programAll channelsAnalog onlyDigital onlyEditCaption Favorite AddApply CancelManual program2 ...... Yes3 ...... Yes4 ...... Yes5 ...... YesCannnelCaption Favorite AddApply Cancelprogram.... YesChanges will be lost. Continue?Yes NoEditCaption Favorite AddApply CancelManual program2 ...... Yes3 ...... YesCannnelEditCannnel Caption Favorite AddApply CancelManual program2 ...... Yes3 ...... Yes4 ...... Yes5 ...... YesEditCaption Favorite AddApply CancelManual program2 ...... YesSelectOKRETURN Prev. pageR Next pageG B Y3 ...... Yes4 ...... Yes5 ...... Yes6 ...... Yes7 ...... Yes8 ...... Yes9 ...... YesCannnelSet favorite 1/31226-1 - - -Automatically searches and adds active channels to memory.Select “ANT in”Select “Auto”•FavoritenextselectUse this procedure when changing setting of receivingchannels or changing the channel display.Also, use to add or skip channels from channel listmanually.Select “Edit”Edit•Captionselectnextselect item to edit(Caption/Favorite/Add)nextSelect the item to be editedCaptionFavoriteAdd • Caption:Changes the station identifier• Favorite:Registers channel to FavoriteList• Add:Adds or skips channelsCheck the signal strength if interference is found or freezing occurs on a digital image.change channelokSignal intensity • Not available if “Cable” is selected in “ANT in”(see above).• Effective only for digital antenna channels.• If the signal is weak, check the antenna.If no problem is found, consult yourlocal dealer.5 Select “Apply”•AddPress OK to select “Yes (add)” or “No (skip)”Select the numberRename (maximum 7 characters available)Select the station identifierselectchangeset/nextselectnextNoteSet favoriteCaption detailCaptionSelect Cable or Antenna(p. 19)• If “Lock” (p. 30) is activated and “Program channel” is selected, “Enter password.” will be displayed.Settings are made automaticallySelect scanning mode (p. 19)okselect• After completing the setting, select “Apply”. (see below 5 ).• All previously saved channels are erased.To cancel the Editok(returns to “Programchannel”)select “Yes”selectnextselect “Apply”okGo back to previous pageProceed tonext pageMove cursor to channel numberselectPress OK to tuneto the channel.