Panasonic Viera TH-42PV62E Operating Instructions Manual

Contents

AdvancedTV/AVOKTV/AV18 19■ To return to TV TV/AVblue (To next page)yellow Press twiceDisplaying PC Screen on TVSelect the external input1Select "PC"2The screen of the PC connected to the unit can be displayed on the TV.You can also listen to PC sound with the audio cable connected. To connect PC (p. 24)Displays PC screen• Corresponding signals(p. 28)• If "H-freq." or "V-freq."is shown in red, thesignals may not besupported.■ PC menu setting (changed as desired)• Making settings "How to Use Menu Functions" to (p. 14)Menu Item Adjustments / Confi gurations(options)Picture menuViewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 14)AdvancedsettingW/B High R White balance of bright red areaandrepeatedly adjustedW/B High B White balance of bright blue areaW/B Low R White balance of dark red areaW/B Low B White balance of dark blue areaGamma (2.0 / 2.2 / 2.5 / S Curve)Setup menuPCsetupInputresolutionSwitches to a wide view• VGA (640 x 480 dots), WVGA (852 x 480 dots),XGA (1,024 x 768 dots), WXGA (1,366 x 768 dots)• Options change depending on signalsClock Set to the minimum level if noise occursH-posAdjust horizontal positionV-posAdjust vertical positionClock phase Eliminate flicker and distortion• Adjust after Clock adjustment • Set to the minimum level if noise occursSync Chooses another synchronous signal if the image is distorted (H&V / On G)• H&V : by the horizontal and vertical signals from your PCOn G : by the green signal from your PC (if available)Volume correction, Side panel, Power save, OSD language (p. 14)• Sound menu (p. 14)• Displaying PC Screen on TV• Editing and Setting ChannelsSetautomaticallyAuto setupSetmanuallyManualtuningManual tuning02 78:01 41CH121ExitSearch down/upReturnDirect entryStoreC 0 9OKSelect the programme numberand search through the channelStoresearchProgrammenumberChannelRepeatandNote• If a VCR isconnected withonly the RFcable, selectprogrammenumber "0".• The programmenumber blinks.To freely change settings after Auto setupEditing and Setting ChannelsAll current tuningdata will be erasedWARNINGExitReturnStart Auto SetupAUTO SETUP IN PROGRESSSEARCHING : PLEASE WAIT02 78:01 41CH12ExitReturnDeutschlandÖsterreichFranceItaliaEspañaPortugalNederlandDanmarkSverigeNorgeSuomiBelgiumSchweizELLADAPolskaČeská republikaMagyarországE.EuCountryOKOKStart Auto setupset• The settings are downloaded to a Q-Linkcompatible equipment connected to the unit.• All previous settings are erased.• When the sequence is completed,the broadcast of programme number"1" will appear.• No data is stored if an Auto setupsequence is interrupted.Automatically set the channels received in the areaSelect your countrySettings are made automaticallyselectstartSTR F - / + / TV / AVSC1CH121Manual tuning02 78:01 41-, + : SearchTV / AV : Move cursorSTR : To storeF : To exit(Press repeatedly until "Tuning mode" appears)or (Access "Manual tuning")(Programme, Channel (select), Sound system)or (Change programme or start searching channels)(Store)- (Repeat)For Manual tuning, using the buttons on the unit("Tuning mode" on p. 7)Programme number (flash)Channel■ To return to TVChannel number (flash)Sound system (flash)