36Main MenuVIERA LinkPictureSoundSetupOffSetup Menu 1/3DVB Timer ProgrammingDVB Profile EditAccessDVB Service ListQ-Link SettingsChild LockTuning MenuOff Timer OffPower on PreferenceTeletext FASTEXTTVOPTION DIRECT TV RECRETURNEXITINPUTRecording ControlsSelect “Setup”Select “DVB Timer Programming”43Display the menu5 Set■ To return to TVEXIT■ To stop recordingEXITTimer Programming from Menu6 Store1 If in Analogue modeSelect DVBCaution• The TV must either be On or in standby.• For preparations of a recording equipment, read the manual of equipment.• No other DVB channel can be selected during recording. However you can watch analogue channels.• It may not be possible to record an encrypted programme (which is copy-protected).2(DVB mode)accessselectaccessselectstoreThe Timer programming menu allows you to choose programmes that you wish to record. At the correcttime, the DVB system will switch on and tune to the correct station (even if the TV is in Standby mode).TV Guide may also be used to set timer programmes. (p. 14)• If the recording equipment is compatible with Q-Link or similar technologies (p. 38), and setup /connection are done completely (p. 38 and p. 42), you do not need to programme the equipment – theDVB system will control the recording progress.• If the recording equipment is not compatible with Q-Link or similar technologies, set “Q-Link” in SetupMenu (p. 23) to the connected terminal (AV1 or AV2), and make timer programming of the recordingequipment (Read the manuals of the equipment).