Panasonic Viera TH-42PZ700 Quick Start Manual

Also see for TH-42PZ700U - 42" Plasma TV: Quick start guide Operating instructions Service manual Technical guide Manual de instrucciones

32MenuAudioLockSetupMemory cardTimerPictureEZ SyncSetup 2/2EZ Sync settingOther adjustAboutEZ Sync settingEZ SyncPower off linkPower on linkOnSetSetSUBSUBMENUMENUEZ SyncTM “HDAVI ControlTM”Simultaneously control all Panasonic “HDAVI Control” equipped components using one buttonon one remote.Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 2” function.Connections to some Panasonic equipment (DVD Recorder DIGA, HD Camcorder, RAM theater,Player theater, Amplifier, etc.) with HDMI cables allow you to interface automatically.The equipment with “HDAVI Control” function enables the following operations:Automatic Input Switching, Power on link, Power off link and Speaker control (p. 33).In addition, the equipment with “HDAVI Control 2” function enables the following operation:EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (p. 33).EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standardknown as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.■For the first time / When adding new equipment, reconnecting the equipment or changing the setup.After the connection turn the equipment on and then switch the TV on.Select the input mode to HDMI 1 or HDMI 2 (p. 24), and make sure that an image isdisplayed correctly.• This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannotbe utilized.It is recommended that you use Panasonic’s HDMI cable.Recommended part number:RP-CDHG15 (4.9 ft/1.5 m), RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m)■ Press to exit frommenu screen■ Press to returnto the previousscreenSelect “Setup”Select “EZ Sync setting”3Select “EZ Sync”4selectnextDisplay menuSelect “On”(default is On)5AutomaticInputSwitching12• If no HDMI equipment is connected or standard HDMIequipment (non- “EZ Sync”) is used, set to “Off”.selectnextselectchangePower onlinkPower offlinkSpeakercontrolOne-touchtheaterplaybackEZ SyncControlonly withTV’s remotecontrol(for “HDAVIControl 2”)Defaultspeakers