35Advanced• Tuning Programmesselect channelsearchDVB Manual TuningAnalogue Scan 21 68FrequencyPosition Service Name Type NewFree TV: 0 Pay TV: 0 Radio: 0 Data: 0StoppedSignal Strength 0 10Signal Quality 0 10MHz474[CH21]Normally use “Auto Setup” or “Add New DVB Services” to add DVB programmes to yourservice list.If tuning has not been done completely or for adjusting the direction of the aerial, use thisfunction.• All services found will be added to theDVB Service List.Set DVBprogrammemanuallyDVB ManualTuningAny new services found will be added to the DVB Service List.Add New DVB ServicesChannel Service Name Type QualityFree TV: 0 Pay TV: 0 Radio: 0 Data: 0SearchingAnalogue Scan 21 68Scan 21 68This will take about 3 minutes. • The new service is added with the current settingssaved as they are.Add DVBprogrammeautomaticallyAdd NewDVB ServicesNew DVB service found!Press OK to start Auto Setup.Press EXIT to lgnore.Selecting Auto Setup will deletecurrent Profile and Childlock settingsSelects whether to give a notification message when a new DVB service is found. (Off / On)• Selecting OK (Auto Setup) will delete the current Profile andChildlock settings.Display anotifi cationmessageNew ServiceMessageAuto Setup - DigitalThis will take about 3 minutes.Scan 21 6862Channel Service Name Type QualityCBBC Channel Free TV 1062 BBC Radio Wales Free TV 1062 E4 Free TV 1062 Cartoon Nwk Free TV 10Free TV: 4 Pay TV: 0 Radio: 0 Data: 0SearchingEXITRETURNStart Auto SetupAll Digital tuning data will be erasedAuto SetupStart Auto Setup Settings are made automatically• All the previous tuning settings are erased.• The analogue settings are downloaded to a Q-Link compatible equipment connected tothe TV in Analogue mode.• When the operation is completed, the programme at programme position “1” will bedisplayed.• If tuning has not been done completely “DVB Manual Tuning”, “Analogue Manual Tuning”Automatically retune all DVB or Analogue programmes received in the area.• Only DVB programmes are retuned in DVB mode.• Only Analogue programmes are retuned in Analogue mode.• If a Child Lock PIN number (p. 33) has been set, it must be entered.Set all DVBor AnalogueprogrammesautomaticallyAuto SetupDVB Signal ConditionDVB Programme [CH70] CBBC ChannelSignal QualitySignal Strength0 100 10Selects a programme and checks the DVB signal condition.• To change the programmeA good Signal Strength is not an indication ofsuitable signal for DVB reception. Please usethe Signal Quality indicator as follows:Signal Quality:• Green bar Good• Yellow bar Poor• Red bar Bad (Check the aerial)CheckDVB signalDVB SignalConditionSet AnalogueprogrammemanuallyAnalogueManualTuning1 BBC1 CH33Analogue Manual TuningManual Tuning 21 68Set Analogue programme manually after Auto Setup.• If a VCR is connected only with the RF cable, select programme position “0”.storesearchSearch and storeSelect the programmeSelect the programme position