AdvancedVCREXIT1 2 34 5 67 8 90MENUOKGUIDEMODEDVBAnalogueOKMENUMODEDVBAnalogueOKOKOK34 35Main menuPicture menuSound menuSetup menuSetup menuAV2Q-LinkOffControl with HDMI OnAV2 out MonitorTVAccessPower on preferenceDVB Setup MenuOwner IDShipping conditionOff timerPower save OffSide panel OffTimer ProgrammingChild LockDVB Setup menuMulti AudioAccessDVB System SetupengDVB Tuning MenuProfile EditRecording ControlsSelect "Setup menu"Select "DVB Setup Menu"43Select "Timer Programming"5The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVBsystem will switch on and tune to the correct station (even if the TV is in Standby mode). If the recording equipment iscompatible with Q-Link or similar technologies (p. 36) and connected to the TV’s AV3 terminal using a SCART cable(p. 40), you do not need to programme the device – the DVB system will control the recording process.TV Guide may also be used to set timer programmes. (p. 12)Display the menu6 How to set the details■ To return to TVEXITCaution• The TV must eitherbe On or in standby.• For preparationsof a recordingequipment, readthe manual ofequipment.■ To stoprecordingGUIDE EXITTimer Programming (DVB mode) from Menu7 Store1 If in Analogue modeSelect DVBSet timerprogrammingdetailsCaution• No other DVB channel can be selected during recording. However you can watch analogue channels.• It may not be possible to record an encrypted programme (which is copy-protected).Note• A message will appear if you try to programme a timer event which overlaps an already programmed event.• 2 min. before the starting time: a reminder message appears.(To remove the message OK button; To cancel the programming EXIT button)• 10 sec. before the starting time: in DVB mode, the unit automatically selects the programmed channel.• Cancelling the programming may not be valid immediately before the starting time. In this case, directly operatethe recording equipment to cancel recording.• Please set the Starting time more than 2 minutes interval from the present time. If you want to record, use DirectTV recording (p. 36).DVB Timer Programming Thu 05/08/04 18:4913BBC1ITV16/8 FR7/8 SA18:0021:3020:0022:3012060OffOffPos. Name Date Start End min.OKOKOKOKsetselectthe itemChannelPrevioustimerprogrammingeventDateStartingtimeEndingtimeSubtitles(Off / Auto)one day aheaddaily or weekly(press repeatedly)Current timerprogrammingeventSelect the programme to be changed using OK and press OKCorrect as necessary (as above)Repeat the operations as below,and set items in the order of toRecording time(automatic display)Daily SU-SA: Sunday to SaturdayDaily MO-SA: Monday to SaturdayDaily MO-FR: Monday to FridayWeekly SA/FR/TH/WE/TU/MO/SU:Same time on the same day every weekTo change a timer programming eventTo cancel a timer programming eventSelect the programme to be deleted using OK and press red, and canalso be enteredwith numericbuttons.startStart makingthe settings• Recording ControlsaccessOK2accessselectaccessselectDirect TV recording:You can record the current programme to DVD Recorder or VCR immediately. (p. 36)TV Guide–Electronic Programme Guide (EPG)–Timer RecordingOperate and in p. 12 (mode and Guide switches)• There are two styles of display for TV Guide (Landscape / Portrait)Select the programme to be broadcastExitReturnSelect timerEdit timerDeleteDVB Timer Programming Thu 05/08/04 18:4913BBC1ITV16/8 FR7/8 SA18:0021:3020:0022:3012060OffOffPos. Name Date Start End min.0 9OK DVB LED(TimerProgrammingscreen)■ To check / change / cancel a timer programming event "Timer Programming" (p. 35)• Orange DVB LED(Rapid blinking during recording)setselect