Panasonic Viera TH-58AX800A Operating Instructions Manual

Also see for Viera TH-65AX800A: Ehelp

Contents

English16: tune (search for the available channels): skip tuningSet up Info Bar function● For more information, refer to [eHELP] (Functions >Info Bar).3 Select the type of [Home Screen]The demonstration to explain how to use [my HomeScreen] is displayed. Confirm the demonstration byfollowing the on-screen instructions, and then select thedesired [Home Screen].Example: [Home Screen Selection]Example: [TV Home Screen]Auto Tuning is now complete andyour TV is ready for viewing.If tuning has failed, check the connection of the network,RF cable, and then follow the on-screen instructions.Note● The TV will automatically go into Standby modewhen no operation is performed for 4 hours if [AutoStandby] in the Timer Menu is set to [On].● The TV will automatically go into Standby mode whenno signal is received and no operation is performedfor 10 minutes if [No signal Power off] in the TimerMenu is set to [On].● To retune all channels[Auto Tuning] in [Tuning Menu] (Setup Menu)● To add the available TV signal mode later[Add TV Signal] in [Tuning Menu] (Setup Menu)● To initialise all settings[Shipping Condition] in [System Menu] (SetupMenu)First time AutoTuningAutomatically sets up the TV and searches for availableTV channels when the TV is turned on for the first time.● These steps are not necessary if the setup has beencompleted by your local dealer.● Please complete connections (p. 9 - 12) and settings(if necessary) of the connected equipment beforestarting Auto Tuning. For details of settings forthe connected equipment, read the manual of theequipment.1 Plug the TV into mains socket andturn power on● Takes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Example:Please select your viewing environment.Home Shop■ How to use remote controlMove the cursorAccess the item / store the settingReturn to the previous item (if available)Select [Home]Select [Home] viewing environment to use in your homeenvironment.● [Shop] is for shop display.● To change viewing environment later on, you willneed to initialise all settings by accessing ShippingCondition.Set up the network connectionSelect your area AustraliaTick the TV signal mode to tune, and then select[Start Auto Tuning]