10Basic ControlsR - STANDBYG POWER ONTH-61PHW6INPUT — VOL +Main POWER ON/OFF Switch VOLUME AdjustmentPress the Volume Up “+”or Down “–” button toincrease or decrease thesound volume level.INPUT button(VIDEO(S VIDEO), COMPONENT/RGB,PC Mode Selection)Press the “INPUT” button to select VIDEO(S VIDEO), COMPONENT/RGB, PC inputsignal modes sequentially.(see page 19)Power IndicatorThe Power Indicator will light.• POWER-OFF Indicator not illuminated(The unit will still consume some power aslong as the power cord is inserted into thewall outlet.)• STAND-BY .....Red• POWER-ON.....GreenOFF TIMER buttonThe Plasma Display can be preset to switch to stand-by after a fixed period. Thesetting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timercancelled) each time the button is pressed.30 60090PC buttonPress the “PC” mode selectionbutton to select the PC mode.This button is used to switchdirectly to PC mode.INPUTSURROUNDVOLN RPICTURE SOUND SET UPASPECTPICTUREPOS. /SIZEOFF TIMERPCINPUT button(VIDEO(S VIDEO), COMPONENT/RGB, PC Mode Selection)Press to select VIDEO(S VIDEO),COMPONENT / RGB, PC input signalmodes sequentially. (see page 19)Sound mute On/Off (see page 27)VOLUME AdjustmentPress the Volume Up “+” or Down“–” button to increase or decreasethe sound volume level.ACTION buttonPress to make selectionsASPECT buttonPress to adjust the aspect.(see page 23)SOUND button (see page 27)SET UP button (see page 33)POSITION buttonsR button (see page 21)STAND-BY(ON/OFF) buttonThe Plasma Display must first be plugged into the walloutlet and turned on at the power switch (see page 18).Press this button to turn the Plasma Display ON, from STAND-BY mode. Press it again to turn the High Definition PlasmaDisplay OFF to STAND-BY mode.SURROUND button(see page 28)N button(see page 21, 26, 27, 29)PICTURE button(see page 29)PICTURE POS./SIZE button(see page 25)STATUS buttonPress the “STATUS” button todisplay the current system status.1 VIDEO(S VIDEO), COMPONENT/ RGB, PC mode2 ASPECT mode (see page 23)3 OFF TIMERThe off timer indicator is displayedonly when the off timer has been set.OFF TIMER 90123VIDEONORMALWhen three minutes remain, “OFF TIMER 3” will flash.The off timer is cancelled if a power interruption occurs.