Panasonic Viera TH-L22X20ZK Operating Instructions Manual

How to Use Menu FunctionsAdvanced25)s,begr))Menu Item Adjustments / Configurations (alternatives)SoundModeSelects basic sound mode (Music / Speech / User)● The selected mode affects all input signals.Music : Improves sound quality for watching music video, etc.Speech : Improves sound quality for watching news, drama, etc.● In Music and Speech mode, you can adjust “Bass” and “Treble”settings, and those settings will be stored for each mode.User : Adjusts the sounds manually by using the equalizer to suit yourfavourite sound quality.● For the User mode, “Equalizer” will appear on the Sound Menuinstead of “Bass” and “Treble”. Select the “Equalizer” and adjustthe frequency. “Equalizer” (below)Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputEqualizerAdjusts the frequency level to suit your favourite sound quality● This function is available when “Mode” is set to “User”.● Select the frequency and change the frequency level by using the cursor button.● If you want to enhance the bass sound, raise the level of the lower frequency. Ifyou want to enhance the treble sound, raise the level of the higher frequency.● To reset the levels of each frequency to the default settings, select the “ResetEqualizer Settings” by using cursor button, and then press the OK button.Balance Adjusts the volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings (Off / V-Audio / V-Audio Surround)V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effectsV-Audio Surround: Provides a dynamic enhancer of width and depth tosimulate improved spatial effects● Switching is also possible by the Surround button on the remote control (p. 10).Volume Correction Adjusts the volume of individual channel or input modeSpeaker Distanceto WallAdjusts the low frequency sound (Over 30cm / Up to 30cm)● If the back space between the TV and wall is over 30 cm, “Over 30cm”is recommended.● If the back space between the TV and wall is within 30 cm, “Up to30cm” is recommended.Preferred AudioLanguageSelects the preferred language for Digital TV multi audio (depending onthe broadcaster)(English / Maori / French / German / Italian / Spanish / Korean /Chinese-Mandarin / Chinese-Cantonese / Japanese / Hindi)MPXSelects multiplex sound mode (if available) (p. 48)● Normally : Stereo● Stereo signal cannot be received: Mono● M1 / M2 : Available while mono signal is transmitted● Analogue TV mode onlyDigital AudioPreferenceSelects the initial setting for audio tracks (Dolby D / HE-AAC)Dolby D : The priority is given in the following order - Dolby Digital,HE-AAC, MPEG1.HE-AAC : The priority is given in the following order - HE-AAC, MPEG1,Dolby Digital.● Dolby Digital is the method of coding digital signals developed by DolbyLaboratories. Apart from stereo (2ch) audio, these signals can be multi-channel audio.● HE-AAC is a perceptual coding method used to compress digital audiofor efficient storage and transmission.● MPEG1/Layer-2 is an audio compression method that compressesaudio to the smaller size without any considerable loss of audio quality.● Digital TV mode onlySPDIF SelectionSPDIF : A standard audio transfer file formatSelects the initial setting for digital audio output signal from DIGITALAUDIO OUT terminal (Auto / PCM)Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC andMPEG are output as PCM.PCM : Digital output signal is fixed to PCM.● For Digital TV mode or Video mode (p. 38)MPEG OpticalLevelAdjusts the audio level of MPEG output from DIGITAL AUDIO OUTterminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)● Normally, MPEG sound is louder comparing with the other types of audio track.● Digital TV mode onlyTH-L22X20ZK,ZS_EN.indb 25TH-L22X20ZK,ZS_EN.indb 25 6/17/2010 12:27:21 PM6/17/2010 12:27:21 PM