8PART NAMES AND FUNCTIONSTV Controls/ Indicators345671 21 Remote Control Signal Receiver• Do not place any objects between the TVremote control signal receiver and remotecontrol.2 Power IndicatorRed: StandbyGreen: OnGreen blink: Receiving a command fromthe remote control.3 VOL +/-• Used to change volume.• Used to adjust the value of the selected itemon On-Screen Menu.4 CH /• Used to change channels.• Used to select item on On-Screen Menu.5 MENU• Open or close the On-Screen Menu.6 INPUT/OK• Use to select an input source.• Confirm and enter a selection.7 (POWER)• Use to turn the TV On or Off.TV (Side / Back)AV INPC AUDIOvia AV 2AV1INST3COMPONENT ST3 ST3Manufactured under licensefrom Dolby Laboratories.Dolby and the double-Dsymbol are trademarks ofDolby Laboratories.AV3 IN>PC<*1891 2 3 74 5 610*1: HDMI 3 is only for TH-L42U5Z model.Note:The examples used throughout this manual are based on the TH-L32C5Zmodel.1 HDMI 1/HDMI 2/HDMI 3 (*1)• Connect all kinds of HDMI output equipment.• When connecting a DVI device using anHDMI-DVI adapter, connect the device to theHDMI1 jack.2 AV 1 IN• Connect video and audio output from videoequipment.3 AV 2 IN• Connect video and audio output from videoequipment.4 DIGITAL AUDIO OUTConnect an audio amplifier to this jack.5 AUDIO OUT• Connect an external sound system to thesejacks.6 ANT• For digital cable, digital terrestrial andanalogue broadcasts.7 PC• Connect computer outputs to this terminal.• Connect an audio cable to L/R jacks of AV2and audio out jack on the computer.8 Headphone• Connect a headphone (stereo) to this jack andthe TV speaker out will be muted.9 AV 3 IN• Connect video and audio output from videoequipment.10 USB• Connect USB memory stick to this terminal toplay Multimedia.