Panasonic Viera TH-L32X50Z Operating Instructions Manual

Also see for Viera TH-L32X50Z: Service manual

Accessories / Options7ls,esHzeecths inse.Attaching / removing the pedestalWarningDo not disassemble or modify the pedestal.● Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than the one provided with this TV.● Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonicdealer immediately.During set-up, make sure that all screws are securely tightened.● If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.Ensure that the TV does not fall over.● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injurymay result.Two or more people are required to install and remove the TV.● If two or more people are not present, the TV may be dropped, and personal injury may result.When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specifiedprocedure. (below)● Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.Assembly screw (4)M5 × 16Bracket● TBL5ZA32151 Base● TBL5ZX03601Assembly screw (4)M4 × 251 Assembling the pedestalUse the assembly screws to fasten the bracketto the base securely.● Make sure that the screws are securely tightened.● Forcing the assembly screws the wrong way willstrip the threads.2 Securing the TVUse the assembly screws to fasten securely.● Tighten the four assembly screws loosely at first, thentighten them firmly to fix securely.● Carry out the work on a horizontal and level surface.BArrow markHole for pedestalinstallationDACFrontHold the bracketnot to fall overRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.1 Remove the assembly screws from the TV.2 Pull out the pedestal from the TV.3 Remove the assembly screw from the bracket.th-l32x50z_book.indb 7th-l32x50z_book.indb 7 2/27/2012 3:09:33 PM2/27/2012 3:09:33 PM