Panasonic Viera TH-P42U20Z Operating Instructions Manual

How to Use Menu FunctionsAdvanced27Menu Item Adjustments / Configurations (alternatives)SetupVIERA Link SettingsVIERA Link Sets to use VIERA Link functions (Off / On)● VIERA Link functions become available when “VIERA Link” is set to “On” (p. 42).Power on Link Sets to use Power on Link functions (Off / On) (p. 42)Power off Link Sets to use Power off Link functions (Off / On) (p. 42)StandbyPower SaveControls the power consumption in Standby mode of the connectedequipment to reduce the power consumption (Off / On) (p. 42)This function is available when “VIERA Link” is set to “On” and “Power● off Link” is set to “On”.IntelligentAutoStandbyMakes non-watched or non-used connected equipment go into Standbymode to reduce the power consumption (Off / On (With reminder) / On(No reminder)) (p. 42)This function is available when “VIERA Link” is set to “On”.●System Menu ShippingCondition Resets all settings to the original condition (p. 34)SystemUpdate Downloads new software to TV (p. 35)SoftwareLicence Displays the software licence informationSystemInformation Displays the system information of this TVOther SettingsAutoStandbySets the time the TV automatically goes to Standby mode when no operationis performed for the selected times (Off / 2 hours / 4 hours)Inserting the SD Card to the card slot does not affect this function.● Automatic input switching with the connected equipment affects this● function and time-count will be reset.The notification message will appear 3 minutes before going to Standby● mode.Power Save Reduces brightness of picture to economise on power consumption (Off / On)16:9OverscanSelects the screen area for displaying the image (Off / On)On: Enlarges the image to hide the edge of the imageOff: Displays the image in the original sizeSet to “On” if noise is generated on the edges of the screen.● This function is available when aspect is set to “16:9”.● This function can be memorized separately for SD (Standard Definition)● and HD (High Definition) signals.Refresh RateChanges the image processing of the panel(depending on the input signal) (50Hz / 100Hz)Set to “100Hz” normally.●VideoPreviewSelects the displaying of the preview window when a video file is selected(Off / On)DVI InputSettingChanges the black level in the image for HDMI input mode with DVI inputsignal manually (Normal / Full)● When the DVI input signal from the external equipment, especially from PC,is displayed, the black level may not be suitable. In this case, select “Full”.The black level for HDMI input signal will be adjusted automatically.●A different menu will be displayed in the mode of SD Card (p. 36 - 40).● Only available items can be selected.●